check your leads and make sure your panel is in stick mode , I've had a problem with my Lincoln ranger 8 with no stick output and I just flip the amp dial back and forth and than I can strike an arc so maybe the dial has to be in just the right spot . But if none of this works contact your Miller gu...

I agree , stainless video would be awesome , I was doing some stainless stick the other day using Excaliber 1/8 309L rods and the main thing for me was getting the amps just right ,try on some scrap and dial it in that's the main thing and then just run them like 7018 , another thing is don't get th...

I have done some Plasma cutting somewhat like this and it works okay, The best thing you can do for Plasma cutting is get a straight edge , a piece of square tubing or angle and clamp it along where you are going to cut . Drag that torch nice and steady and you should get a decent cut that would nee...