your absolutely correct. In further checking my wire was NOT in the roller groove, once I corrected that and reset the tension all was good.
Thanks for the response.
Phil

:| Living in Wisconsin has its downfalls sometimes and I have a quick question. Yesterday the temp dropped to 35F and all of a sudden my welder wire speed got erratic. I had to increase and tighten the roller pressure to get it to feed and weld good. I also had to increase the heat for the 1/8 mater...

thanks much, that clears it all up for me.
Great group!

I don't have tig, just mig, so I setup for the larger piece and what I call feather(wash) the weld into the thinner material. So far has worked fine for me.

Just started welding and have learned a great deal from the videos on this site BUT I have one major question. I have a 2 gauge setup, one for tank pressure and the other show CFH. Decided to jump up to a flow meter and NOW it is calibrated in SCFH??? I've looked everywhere and can't find how to con...