Thank you very much for taking the dime to verify my purchase Songer121. My torch is set up now to do some welding on Friday.
Thanks for all the help guys, looking forward to using this great torch.

Joe

The copper sleve in the Everlast looks to be bonded in. Or is it threaded, I don't want to break it off as I wont have a torch to use.
Forum will only let me post one picture at a time.

Joe

Here is the connectors with the shells off.

Here is the tag on the connector I bought.

Attaching a picture of the economy torch end and the CK end. The CK is around .125 longer and the lock pin is located in a different location. The CK does lock in but is loose when fully inserted and turned. I did what cj737 posted and spun the plastic collar to lock it securely in the welder. Still...

Is there a certain numbers of posts that have to be met by a poster before we can post pictures? The up load icon is not showing up when I post. I have searched the How to use the forum and only see that a file size max of 256kb.
Joe

I will check it out tomorrow and see if the 9mm quick release male adapter comes off the economy torch supplied with the unit.
Hope so if not I can at least copy it.
Joe

Ok Thanks for the reply's guys. I thought the hole was going back to the hose line but I guess it is blocked of internally so gas only exit's out the torch.

Joe.

The connector does go in the welder and does twist to lock. The everlast brass end is solid but the ck dinse has a hole thru it. I was aware of the gas end fitting end on ck is threaded and was going to machine a quick release fitting to adapt to the weld unit. I did notice the dinse on ck a 1/8 in ...

I bought a CK 17 super flex torch and a Dinse 35 connector from CK for a Everlast 210EXT and the 35mm dinse is incorrect. I bought the SL2-35 and it is different than the end from everlast. Anyone know where one can be bought from and or the correct part number to order for my new torch. I cant post...

If I had yours Otto I would get the 255ext and a cooler. Ha

Thanks for all the information guys.

I have called in to Everlast and got a quote on a 210EXT with upgraded torches and Nova pedal. I think this welder will fit my needs for aluminum welding just fine. Now just need to give the man a credit card number. LOL
Joe

Guys Im new to tig welding and looking at the 2017 Everlast PowerTIG 250EX AC DC TIG STICK. Anyone buy one recently and what do you think of the std torch and pedal included with it? There are a lot of you tube videos that show the welder being used and looks to do the job. Being a new to tig weldin...

Hello all, I am a new member to the forum from St. Louis Mo and wanting to learn how to tig weld. Has been 30 years since I have had a torch in my hand and looks like there are a lot of new welding manufactures out there. I will need to get some guidance from you experienced tig welders out there on...