3mm plate 1/8 inch not sure on voltage its on number 4 out of 6
If i turn wire speed up will that create more spatter and do i have too much now

Some fillet welds opinions please - Running 0.35 Wire ,Argon/CO2 mix wire speed about 150 inch/min Push Technique http://i1168.photobucket.com/albums/r487/brettm357/IMG_1015_zpsjvanoam8.jpg http://i1168.photobucket.com/albums/r487/brettm357/IMG_1014_zps8ybs7hap.jpg http://i1168.photobucket.com/album...

Any disadvantage using the .035 up first

Newbie learning to Mig max steel thickness probably about 3mm 1/8 inch Mig spec sheet is 40 Amp Min 150A Max - should i be using 0.8 (.030) or 0.9 (.035) wire

Machine about 30 years old that i just brought Currently has 0.9 in it

That worked

So having watched videos and read articles these are my some of my first mig beads opinions if they look ok

Probably not the best view