Gday all, after a foot pedal for my machine, Esseti 200 ac/dc, Italian mob who are no longer in business from what I can tell. Anyone know if I can use any 7 pin foot pedal with it?? Or are they specific to machines? Cheers all. Hi. Some time ago I've adapted a Chinese pedal to fit my Cloos 250 amp...

Finally I found some time to do the "test" that I announced... Using 5mm (~3/16) Aluminum plate, unknown alloy with a little cleaning. http://www.in-der-acht.de/imghost/weldingtipsandtricks/cleaning/plate_500.jpg All the following shots were done using 1/8 1.5% Lanth electrode, #17 torch w...

Hi both. Thanks for your response. So for the torch everything should be just fine. I also think that the normal operation pressure is way below the pressure where the leaking started. Regarding AC balance on my machine, the manual explicitly mentions a range from 5% positive up to 95% positive curr...

Hi. I already asked one the following questions in my introduction, but I assume introductions are not read by everybody. ;) So I try it here again: #1 On my machine I can adjust AC balance from 1-10: 1=95% negative 5=50% negative 10=5 % negative So far, I was welding aluminum at around '3', meaning...

AndersK wrote: Jody's webpage says he ship to Germany.

On the FAQ yes, but on the checkout form, Germany is not in the list.
I asked some time ago using the contact form, but no reply.

Hi there. I'm a hobbyist welder from Germany (don't hesitate to point out any mistakes in my English writing, always want to learn/improve... ), started TIG welding last year and enjoying it every time I can get some spare time. I've got an Esseti 250A AC/DC inverter machine from around 1990, still ...