Search found 3 matches

by Weldworks
Fri Aug 18, 2017 11:49 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Lincoln 71m .035 poor penetration
Replies: 14
Views: 6715

Re: Lincoln 71m .035 poor penetration

This little welder is balls to the wall as is. The reason im running it in this welder is actually from one of the welding tips and tricks videos, jody has a buddy who uses this wire in this machine. I feel like im off technique wise somewhere with this little wire. The dual shield I normally run is...
by Weldworks
Fri Aug 18, 2017 1:17 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Lincoln 71m .035 poor penetration
Replies: 14
Views: 6715

Re: Lincoln 71m .035 poor penetration

Appreciate your reply. That was what I thought prior to my last runs above, that piece above was welded concentrating on staying as far in front of the puddle as I could. That was a 10" piece. Started dragging, then straight in, then push. 3/4" stickout throughout. Same results each cut an...
by Weldworks
Fri Aug 18, 2017 2:21 am
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Lincoln 71m .035 poor penetration
Replies: 14
Views: 6715

Lincoln 71m .035 poor penetration

https://ibb.co/eBD57F https://ibb.co/hXOzZv I have never run this wire before. I have run quite a bit of esab dual shield, 7100, 710x-m, 711x-m in .052 and larger in my millermatic 200, miller 12vs and an xmt, and ln-25 on various power supplies. I havent had any issues with penetration or any chro...