Correct it's set to 60Hz so nothing I can do there

Just looking for some advice on how to minimize the etching or"frosting" around my aluminum welds.. I have an aluminum hood that I will be doing next week and would like the corners to have minimal etching as it doesn't get painted or anything.. It's 1/8" 6061.. I am using a snycrowav...

Hey just looking for advice on an good all in one tungsten.. I currently use 2% thoriated and Pure tungsten as that's what my workplace provided but trying to switch so we don't have to buy 2 types.. We're I am in Canada they don't sell 2% lanthinated but the welding supplier here suggested E3.. I a...

Awesome I will keep that in mind.. I don't do to many parts that require filler only one so far that I do is some stainless steel hinges which I use lay wire to weld the knuckles on and it works awesome and fast but the plates are 1/4" and the knuckles have a 3/16 wall thickness.. but all good ...

Thanks for the input I usually fuse my corners as long as fit up is good but most times the parts get to me with abit of a gap..

Hey just had a question on when to use lay wire and when not too.. at my current job I have been the only tig welding just learning as I go.. I mostly do some outside corner joints in #4 finish stainless and if fit up isn't perfect I like to lay the wire in and just weave it in.. we recently hired a...

Sounds like you got a good thing going with the trailers hopefully that all pans out well for you and good to have you on the forum..

Hey my name is Tyler and I'm 33yrs old and I've been welding for 13yrs and have been at the same metal fab shop for the past 10yrs. I started as the only welder now I manage 3 other ppl.. Convinced my employer to send me to a 12 week course on Tig welding about 7yrs ago and now I have been doing tha...