Search found 75 matches
- by Darrin
- Sun Apr 15, 2018 4:06 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
this is the inside pics. Cheers. to state the obvious is the dodgy spade terminal with two wires almost pulled out of it. plus the joiner on the far right. looks like its been played with at some stage. i would just check where those wires go to. also check the fuse on that sub board, can't tell in...
- by Darrin
- Sun Apr 15, 2018 3:46 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
At least we know the problem is not the gun or trigger switch. Unplug the machine and closely examine the gun cable connector and wires running to it. The big lump of brass should have 1 heavy wire and 2 light wires running to it. I think the light wires plug into the machine wiring but I'm running...
- by Darrin
- Sun Apr 15, 2018 3:33 am
- Forum: Member Introductions
- Topic: G'day..
- Replies: 10
- Views: 870
Re: G'day..
Gday mate, Stato? Holden fan fromOz??!!! Only joined recently myself, great guys and great info. What sort of machines you looking at??
- by Darrin
- Sun Apr 15, 2018 3:12 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
Looks like it's built similar to an Ltec, current switching is on the primary side of the power transformer, so just for the hell of it, completely unplug the gun from the machine and turn the machine on to see if gas flows and the wire drive runs. We'll call that Plan A - 1 Yep, gas still runs, no...
- by Darrin
- Sun Apr 15, 2018 2:50 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
Basic tapped transformer machine http://www.metalworkingadvisor.com.au/reviews/welding-equipment-reviews/unimig-180-portable-mig-welder/ https://www.manualslib.com/manual/783942/Unimig-Kmm180.html?page=3#manual PLAN B- have you got a voltmeter and a mate who can fly safety man in case you get elect...
- by Darrin
- Sat Apr 14, 2018 10:34 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
No, pretty basic unit mate.tweake wrote:does it have a 4t setting ?
- by Darrin
- Sat Apr 14, 2018 10:23 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
Thanks for the replies Franz, Josh and Dave. It started doing it when the brother in law borrowed it, at the start I’m sure he said it was feeding wire as well when the trigger was not pulled, but now just gas and live torch.......still welds but freaking annoying.
- by Darrin
- Sat Apr 14, 2018 10:00 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Re: Mig elec problem? Not solenoid....
How about maybe you give us a chance to find the machine's schematics by providing manufacture & model? Definitely odd to have power & gas flowing without wire moving as well. Uni mig mini mig 180 KMM180. Pretty generic model I’m guessing put out under numerous brands?? I cant find a schema...
- by Darrin
- Sat Apr 14, 2018 6:35 am
- Forum: Welding Forum General Shop Talk
- Topic: Want opinions, thinking of buying this welder..
- Replies: 48
- Views: 4956
Re: Want opinions, thinking of buying this welder..
I just made a 15 amp to 10 amp lead and run with that, no problem or difference i could tell from my last house with a dedicated 15amp plug. Uni mig are now Jasic units i believe? Iv got a little 180 uni mig......just shit itself.......but up until now has been awesome. Most units you’ll find are no...
- by Darrin
- Sat Apr 14, 2018 6:25 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
Morning guys, stupid question I’m sure, on my old Tig, and I’m talking 18 year old machine, I’m going to. Put a foot pedal on, which I’s fine,but when i was looking at the machine to check connection type i noticed this (attached pic) can someone tell me what its for, instructions have long since g...
- by Darrin
- Sat Apr 14, 2018 1:57 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig elec problem? Not solenoid....
- Replies: 27
- Views: 2620
Mig elec problem? Not solenoid....
Gday. Folks, as ive been building a new house the tools have been in storage for a few months.my mig has developed an intermittent problem where the gas would continue to flow after the trigger was released until the bottle was closed or the machine was turned off.....the torch itself also remained ...
- by Darrin
- Sun Apr 08, 2018 7:40 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Transmig 250 experiences
- Replies: 10
- Views: 1040
Re: Transmig 250 experiences
Have a look through ebay and you'll see that all the reasonable 250 amp migs are around that price maybe he'll come down a bit, maybe he won't. An Australian made cigweld will definitely be better than most I think the price is reasonable for what it is and it’s condition, I just want a reliable un...
- by Darrin
- Sun Apr 08, 2018 7:08 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Transmig 250 experiences
- Replies: 10
- Views: 1040
Re: Transmig 250 experiences
Probably a bit steep at $1000.00, but is as new and aus built......I’m running a 180 and it’s been playing up lately so thought it might be an option...weldin mike 27 wrote:Just saw above. I want to buy a 250 mig but I don't have available funds.
- by Darrin
- Sun Apr 08, 2018 4:37 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Transmig 250 experiences
- Replies: 10
- Views: 1040
Re: Transmig 250 experiences
I have a similar 250 , mine has the remote wire feeder. Plenty of these machines out there, single roller drive, basic migs. I heard complaints about them but I’ve taken the time to look at the the so called problem machines and in every case there was an explanation including mismatched drive roll...
- by Darrin
- Sun Apr 08, 2018 3:28 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Transmig 250 experiences
- Replies: 10
- Views: 1040
Transmig 250 experiences
Hi guys and gals, any one got experience with this unit in pic? Good, bad or otherwise. It was prior to the Chinese built units. Guys selling this one and I need some more amps and thing has done no work whatsoever. Any help appreciated. Cheers.
- by Darrin
- Thu Apr 05, 2018 7:00 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: outside corner repair
- Replies: 18
- Views: 1637
Re: outside corner repair
Not pressurised I take it?? If its not the base of a 40 000 gallon tank!! I’d just grind the affected area with a rotary burr, like your firs pic and build it up from there?? Maybe some more experienced guys can chime in, ive not done tank work!!
- by Darrin
- Mon Apr 02, 2018 5:32 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
I found that out!!! Thanks mate!!tweake wrote:from what i can google esseti was Italian and are long gone.
the nz web site is just a left over of the kiwi importer.
you would have to find if someone has uploaded a manual for one. be aware theres a lot of BS hijacker pdf's pretending to be an esseti manual.
- by Darrin
- Mon Apr 02, 2018 5:11 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
Looks that way!!!! Thanks again mate!!!Franz© wrote:Looks like the Kiwis managed to abscond with the company.
Maybe you can trade them some vegimite & Fosters for the manual.
- by Darrin
- Mon Apr 02, 2018 12:17 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
It’s an Esseti 200 ac/dc, cant find anything online, bit old i think....ill email the Kiwis, they look like they are the closest distributor, see if they have an archive....Franz© wrote:you have a manufacturer and model number for the machine?
- by Darrin
- Sun Apr 01, 2018 11:58 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
Might be something to do with being upside down and having to make so many ovederhead welds down there. That machine has more knobs and plugs than a sane man needs, wonder if it's supposed to interact with a robot? Only possible I can think, if green is foot, could orange be for a thumb knob on the...
- by Darrin
- Sun Apr 01, 2018 11:39 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Re: Tig socket, what is this??
I do American Standard English, Russian and a bit of Aussie. International take a guess what this is a picture of isn't one of my strengths, but I'll throw foot pedal connects here out there as my best guess. Fair dincum. Your Aussie is good Franz!! I should have attached the full image, I think th...
- by Darrin
- Sun Apr 01, 2018 7:06 pm
- Forum: Welding Forum General Shop Talk
- Topic: best welding table for beginner
- Replies: 20
- Views: 4773
Re: best welding table for beginner
Ive recently purchased the strong hand 900 x 600 as I couldn’t justify the expense of a better table for the amount off work I’m doing. It’s nice, does the job well. In a Shop environment however I’d obviously go a certi flat......but for light use its fine. Then ive got a welding table on castors t...
- by Darrin
- Sun Apr 01, 2018 6:48 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig socket, what is this??
- Replies: 36
- Views: 3920
Tig socket, what is this??
Morning guys, stupid question I’m sure, on my old Tig, and I’m talking 18 year old machine, I’m going to. Put a foot pedal on, which I’s fine,but when i was looking at the machine to check connection type i noticed this (attached pic) can someone tell me what its for, instructions have long since go...
- by Darrin
- Sun Apr 01, 2018 6:07 pm
- Forum: Member Introductions
- Topic: Gday from Oz
- Replies: 4
- Views: 723
Re: Gday from Oz
Thanks for the welcome guys!
- by Darrin
- Sat Mar 31, 2018 1:19 am
- Forum: Member Introductions
- Topic: Gday from Oz
- Replies: 4
- Views: 723
Gday from Oz
Hi all!! Just getting back into welding (hobbyist) sheetmetal worker in days gone by but a lot has changed in machines and techniques since i was welding.....looking forward to learning as much as i can!! Cheers.
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities