Yes I'm using the same helmet. It's as if the plasma doesn't light up the surroundings as much as in stick welding. The shade grades are all standard according to specification. I weld TIG at 8 and stick and MIG at 11. If those shades aren't letting you see it is for one of two reasons I believe: o...

Nice. Yeah it's pretty tough to fit a whole shop into your garage.

3 times you had the opportunity to leave it but one person or another wanted to continue to talk about it. Don't put the blame on any one person. And don't get your panties in a wad. The OP admitted he shouldn't have started it and that should be it. No harm. No foul. Move on. By continuing to make ...

I disagree. Keep reading the next verses. But you, Israel, are My servant, Jacob whom I have chosen, The descendants of Abraham My friend. You whom I have taken from the ends of the earth, And called from its farthest regions, And said to you, ‘You are My servant, I have chosen you and have not cas...

Good advice there. About encouraging each other and helping a brother out. Finally something that relates to this forum. You don't understand the word. This passage is not a picture of brotherly support. It is a picture of fear of the people and them scrambling to fight against what God has brought...

hang on, hang on!! The islands see and fear, the ends of the earth tremble. They approach and come forward. Each one helps the other, and says to his brother, “Be strong!” The craftsman encourages the goldsmith, and he who wields the hammer cheers him who strikes the anvil, saying of the soldering,...

I hope someone comes to back me up on this but I'd MIG it. 6010 just seems a little too much for the 5/32 chassis but it is all in how you weld it. Now I don't know much about mechanics and upgrading automotive parts but when it comes to welding structural thinner plate, MIG is good for it since it ...

I'm probably not the one to answer this but I was interested in the topic so I found this Kemppi 10 pin connector and potentiometer. I'm not sure if it's what you need or if you can get it from them. I'm guessing you just need to know exactly which pin it is for your machine and what potentiometer t...

I will try to help if I can. You have to program settings into the machine and save them via the Program button prior to activating which Trigger Control mode. The DS (dual schedule), TH (trigger hold), 4T, TDS (trigger dual schedule) and TPS (trigger program schedule) all operate independently more...

robtg wrote:"Yah, you are right. You should have never mentioned God. Watch out for the holy people. They are everywhere. Good luck with your hitch."

What if he mentioned Allah,would that get your panties in a twist?

What if the truth was spoken to you? Would that get your panties in a twist?

You don't know me or my beliefs and you insult me by presuming that you do and preaching to me on this welding forum. Surely there's a born again forum somewhere that you can bore people on. Have you been brainwashed into babbling on at hearing a particular word? I was just about to say Amen! But I...

It just sounds like it's cold if the rod is sticking frequently. The secret to stainless and mild steel is going hotter and faster. You can only go as hot as you can go fast though. So I'd increase the amps slightly and try and keep up, burying the filler in as you go. Then increase the amps again u...

I'm sure you'll get better answers with more information than what I have but steel is fundamentally different from aluminum and this feature of lower sitting welds is one of those fundamental differences. It's going to be lower than aluminum by default, no blame to technique or settings. However, y...

You don't know me or my beliefs and you insult me by presuming that you do and preaching to me on this welding forum. Surely there's a born again forum somewhere that you can bore people on. Have you been brainwashed into babbling on at hearing a particular word? Sent from my POCOPHONE F1 using Tap...

As long as you don't know God, do not mention him or I will certainly make it known to you what you are missing. Live your life and do whatever is right in your own eyes but whatever you do, do not mention God while you are doing that, deceiving yourself. But hey, you can't have your cake and eat it...

It looks to me as though the gas lines will only fit into those style tanks. But I assume if you were to get a gas flow regulator for the oxygen tanks and an adapter, if even available, for your torch lines then you could get the same oxygen levels in your torch and it would work. But, I don't think...

robtg wrote:Then why did you?

Because he mentioned God.

robtg wrote:We didn't come to a welding forum to be preached at.

It's alright. I didn't come to a welding forum to preach.

I only meant that in regard to GOD being a spiritual person for me, I don't believe in any Baptism or Church related reference. I have no idea about anything in any old books, just what my heart tells me to follow. Well now you know what being a godly person looks like. I'm sure you can understand ...

Yes, I always seem to do that, but there's a lot of drama queens on the Internet and it's up to each of us to sort out the wheat from the chaff so to speak. ;) You mentioned God so I wanted to point out something to you. There are so many things wrong with this statement right here. First, it's pla...

Looks amazing. Nice work.

Hey sounds good. I thought it might be more superficial like you are saying. So I'm glad you are confident of it overall.

Looks cool. Hey I'd be interested in seeing more of the welds and see if I or others can't give any pointers. If you're interested. Looking at this weld here it appears that there is some undercut. Now I don't know much about being a mechanic and upgrading suspensions but if this was being put throu...

That's great. You won't have to have as much EP balance if you clean the weld area prior to welding. Too much EP balance may cause the aluminum to spit back onto the tungsten given enough amperage. For practice it's not necessary to clean the weld area but for production it's the only way to get con...

I forgot about DCEP as well. I'm sure it will help and I suspect with a more uniform fusion from the new rod it will make for an easier time to fit the tolerances and it won't be so hit or miss and nerve wracking. At least I hope.