Alright thanks for the tips, looking forward to drop $250 on an argon tank..

I though you needed 100% argon just for aluminium

I got an eastwood tig 200, I have a 75% co2 argon mix @ 15 cfh and running with a 3/32 tungsten set at 110 amps. The steel is 3/16" and it wasn't cleaned before use. I know that it should be cleaned with a wire brush but I was too lazy to pull out the grinder :roll: . However I don't dip the t...

I got an eastwood tig 200, I have a 75% co2 argon mix @ 15 cfh and running with a 3/32 tungsten set at 110 amps. The steel is 3/16" and it wasn't cleaned before use. I know that it should be cleaned with a wire brush but I was too lazy to pull out the grinder :roll: . However I don't dip the tu...

New to Tig Welding, I am a hobbiest and I've used and "mastered" other processes. I got some pictures here and was wondering if I can get some little tips.

Bought this torch kit second hand and it advertised having reverse flow check valves. I already bought a flashback arrestor kit and was wondering if the arrestors are needed.