Try some AnchorLube. It is water based & I really like it. I have seen it thinned down with water & used as a mist type coolant for milling.

Cleans up easy with water or you can let it dry & it flakes right off.

https://anchorlube.com/

If you plan on using a steel cut off blade, make sure the saw RPM is within blade rating. Most steel saws like the Evolution run at lower RPM than abrasive saws.

ESAB Savage A40 is a reasonable option. Amazon - $132.00

https://esab.com/us/nam_en/products-sol ... avage-a40/

Where I am in Texas, we don't have a problem with paint. Not much snow, no salt on roads, no ocean salt, & this year no rain! Less than 3" on my place since Sept last year!

Most GOOD trailer manufacturers use seam seal/caulk to finish joints that are skip welded. Makes the paint job look better, just like GOOD house painters seal the cracks before they paint.

The OEM QC bracket is welded with MIG I'll bet. So - parameters correct, your skill level OK, weld procedure right.

All is well.

Then once you get shiny steel, hold the flame on the angle & just touch the blue point at the tip on the angle right at the joint just long enough to puddle. Keep the point off the edge of the flat bar. Once you puddle then back the torch off to normal tip distance & go to town.

Use stainless for the top frame if possible & for sure stainless bolts for the top. Antiseize the bolts & you should be able to control the corrosion.

Should be fine outside under the carport. Just make a canvas cover that can be removed when using it, or build a box cover that can be removed when you want to use it.

6011 root pass, then 7018AC. That RR iron is going to need some preheat & the 6011 pass will do that if you come back quick with the 7018.
A cattle guard takes a h3ll of a beating every time you cross it with a load & no one slows down enough.

Wens lens makes a cool blue that is nice. Philips has one also.

http://www.plwelder.com/store.php/categ ... ter-plates

I would just add a couple of members to the tongue & call it good. No muss, no fuss.

Great. Glad to help.

I have used one, they work pretty good fr small jobs. I use a welding hood with clear plates instead of the cheezy hood they include with the pot.

With a good compressor it works OK.

PM an address & I'll send you one. I have one on my desk that I don't need.

cwby wrote:Search for "bushing, Tank Fuel"
Older bobcats used a 124253 part number.

https://weldingsupply.com/cgi-bin/einst ... F:X:124253

Amazon has a 2 pak also.

cwby wrote:Search for "bushing, Tank Fuel"
Older bobcats used a 124253 part number.

https://weldingsupply.com/cgi-bin/einst ... F:X:124253

Amazon has a 2 pak also.

Search for "bushing, Tank Fuel"
Older bobcats used a 124253 part number.

30 degree bevel, nickle gap, nickle land.

FirstEliminator wrote:Hey guys,
The repair I am looking for needs to be not visible.
What would be the best course of repair for this?
thank you,
Mark

Might be a good solution - The DHC Cobra torch is a niche tool. but plenty cool for some uses.

https://youtu.be/CorPYHHOpus

They rent them & the ones they have have already been designed, tested & work!

https://www.red-d-arc.com/rental-equipm ... ub_cat=180

350 to 400* preheat, then 7018 might get you somewhere if you let it cool down SLOW.

Just don't hang 1000# pounds on it with something you want to keep underneath it (toes, fingers, etc.), cause it might work or it might not - only determined with destructive testing.

Maybe that's the way to go. I don't know how fast an annular cutter goes through steel. I wonder how many days I would need it for. The way I always rented equipment like that - is pickup on Friday afternoon for a one day rental & since the rental company isn't open Saturday afternoon, return o...

Hi everyone, I’m training to be a pipeline welder while also learning all processes but besides that I was wondering what a good starting truck would be like? Does it have to be a diesel or can it be gas? Does it have to be a dually or is that just desirable and what’s your opinion. Any feed back w...

PL Welder, Pancake hoods,Wendys, Sarges.

I think each sells replacements.