Right on!

I’ve been trying to get away from using acetone for cleaning my material. I’ve heard of people using 70% alcohol, but I recently scored a 5 gallon jug of 90% from work. Are there any issues with cleaning with this?

It is for helium. I just need to shorten the hose.


Sent from my iPhone using Tapatalk

So I think I figured it out. As I said, I installed a new hose, but I also added a y valve which also had a long hose. Both of these hoses together were accumulating too much agron giving me a blast when I pushed the pedal. Removed the second hose and back to normal. Thanks for all the input. https:...

I post a bit of pictures in my Instagram page @aadecktor. Due to nda’s I have to wait until the show comes out to post so hopefully soon I’ll have some really cool things to share.


Sent from my iPhone using Tapatalk

I post a bit of pictures in my Instagram page @aadecktor. Due to nda’s I have to wait until the show comes out to post so hopefully soon I’ll have some really cool things to share.


Sent from my iPhone using Tapatalk

Thanks for all the suggestions. As soon as I get back into the shop I’ll go through everything. I started thinking about the reg. After I posted. I’ll let you know.


Sent from my iPhone using Tapatalk

Hello I use a Miller syncrowave 350 dx. I’m having an issue with my shielding gas. When I press the pedal the argon flow starts out really strong as in 30-40 cfh and then settles down to my desired flow rate. This seems to be giving me bad starts on ac aluminum. I’m getting a dirty tack. I have the ...

Hi, my name is Alan. I’m a special effects fabricator in the motion picture industry. I weld everything except stick. We do a lot of short circuit mig all the way up to structural dual shield. My favorite is tig aluminum. My machine is a miller syncrowave 350dx. Spfx is a really fun industry. We bui...