Done

Landscapers and demo guys use them so stuff doesn’t get stuck in body.

Latch and locks

And some more

Making some barn doors for a small dump truck

Didn’t break off ,web broke and bent flange

A little ramp repair for a contractor contractor

I do all my cutting and welding outside

Nice

Thanks guys

Nice job

Buckets of sand, gallon jugs of water or sand, look for stuff you have laying around. You don’t have to get fancy ,your just going to pick things up and put them down.

Where the split is you can see the factory edge with NO marks on it

There’s a metal plate that runs between the two welds

Nice

I like welding heavy steel . I don’t do a lot of hard face.

More problems.

Here’s the problem

Cleaning up the breaks

Welding

This what I do to put new cutting on excavators with dozer blades 1). Clean up grind flat old edge 2). Clean up and cut to length new edge 3). Clamp new edge to front of old edge about 1/2 lower for welding 4). Alternate stitch welding starting in middle where the edges meet I’ve done many like this...

Neighbor brought mower over for me to fix pully bracket that rusted off . First had to cut out rusted out area then replace with new steel. Next weld bracket back on ,then mount pully and belt.

A lot of people think equipment is indestructible . They don’t realize how much power it has

If they didn’t bust up the equipment they wouldn’t need me to fix it.$$$$$$

This is what we call a farmer fix (fix it but don’t spend any money).