I have an Everlast 253 DPI and I have used double pulse with .030-.035-and .045 wire and non pulse with the same wires. The .030 wire works very well and is easy to reach the spray transfer mode. I think the yes welder would work very well with .030 wire and the correct gas

Ine from Italy is a great wire at 1/2 the cost of L56--Look on Amazon for Ine wire

I use Ine wire from Italy and it works great--I have also used several spools of Lincoln L56 and the wire from Italy seems to work as well as the L56 at 1/2 the price

Thank you I will try that

Mig settings for 1/2" mild steel--Amps and Volts Lincoln ultracore SR-12 .045 wire---any suggestions?

I see that Nital is used by many people to check welding penetration--In my area Nital is hard to get or find--I found that phosphoric acid works very well and is available at amazon cheap

I have a Everlast 253 DPI and I want to weld 12 and 16 gage metal using pulse or double pulse can anyone tell me what I should set the amps at to pulse weld this thin metal .030 wire