First thing tomorrow morning, I'm getting a fresh bottle. We will see then what happens. I will report back.

Oh - we all forgot to mention the leak on argon line / venturi effect thing as a possible - and as I don't have a dynasty is the balance + or - as not all makes express this the same way - just asking due to very little cleaning action .find it harder to write about something than actually doing it...

Others with more aluminum experience will likely chime in on this one - but from the appearance of some limited cleaning action at the start of the run & relatively shiny metal then getting dirtier & smoky I would think it likely you have restricted gas flow - some but not much is there as ...

Watch some of Jody's videos and then try again. Easiest spot is at welding-tv.com. "Watch stuff" menu is in the upper left corner. You could be doing several things wrong, or could be a shielding gas or machine problem. Try the videos out and see if they answer any questions for you. That...

Here is my setup: Miller Dynasty 200 DX foot pedal 120 amps freq 120 balance 67 3/32 2% Lanthanated tungsten 3/32 4043 filler Problem: When I light up on aluminum it wet fine with a nice defined puddle. The problem begins when I try to add filler. The filler will become a ball with a grey coating to...