Welcome Aboard!

To the best of my knowledge (my AWS/CWI ran out 5 tears ago), there has been no change in any applicable code. You are correct; Lincoln 5P is a specialty brand of the E6010 family My guess is that he was pulling your leg...WHY?...just because he could! Many welders choose to use the edge of a file t...

Steve,

Those factory default settings listed are EXACTLY what I was looking for...
Thanks a million!



Mike

Thanks again for your expertise!

Mike

Does any one know how to reset (to zero) the five programmable parameters in this machine?

Thanks

[quote="Otto Nobedder"]I saw a cartoon many years ago, may have even been "Peanuts", where "planned obsolescence" is explained... Things wear out so they have to be replaced. When the kid gets it, he says "AHA! Thats how God made people!" :o Steve S[/quote] St...

YES, it can. The pinouts are the same on both units. http://www.naalive.com/cataloglistingitem.aspx?lotid=1745473 Attached are the manuals for both units. http://www.millerwelds.com/om/o898d_mil.pdf http://www.millerwelds.com/om/o233045g_mil.pdf Thanks a million for the tech info;it made my decisio...

Thanks Steve,

At this point, I'll no doubt contact Miller and see what their techs have to say.
I abhor planned obsolescence!!!!

Mike

Can I use a Miller PC 300 Pulse DC/AC TIG Control with my XMT 304 cc/cv
Thanks,
Mike

Mick,

Thanks for your input/advice.
He did a great job on that project

I am recently retired and have decided to make small stainless and carbon steel art projects in my backyard shop. Over the years I have purchased and currently own: Miller XMT 304 cc/cv with Miller RFC-14 foot control remote Miller SuitCase® 12RC (w/Bernard Mig Gun) Miller Optima 304 Mig Pulse Penda...

Can someone advise me on the appropriate tig wire for 430 grade stainless steel?

Thanks

Anyone have any info/experience with Miller's Intellitig 4 Precision Tig Controller ?
I am aware that they are not made anymore, but the little information I could find, seemed like this could be a worthwhile addition to my hobby shop.

Thanks (in advance) for any help...

Anyone have any info/experience with Miller's Intellitig 4 Precision Tig Controller ? I am aware that they are not made anymore, but the little information I could find, seemed like this could be a worthwhile addition to my hobby shop. Thanks (in advance) for any help... BoilermakersLogoWhiteGold.gif

Thank You Kindly...

I have a Miller XMT 304 CC/CV. It takes a (14) pin connection for the remote connection. Can someone please tell me if I can somehow adapt a Miller RCFS-14 foot pedal with a (5) pin plug?
Is it simply a matter of changing the plug end, or is it more complicated?

Thanks

Retired Boilermaker from the Philadelphia, PA area.
Best Cheese Steaks (and Welders) in the country!