I give a sample of this new machine I recommend to everybody .It was a long piece broken and I add a piece of 4mm aluminium and I weld it.The purpose was to be as original but I made few mistakes and I go a bit inpatient I think I do better next time .The area the new piece is inserted it is where t...

I sold it eventually and i bought a new machine FRONIUS , i do know if you know it but it is a poem , poetry . I go it to work to learn it it has 180 pages of manual . Eveyrhting is ajustable.

This is reply to my case problem , upon new evidence .Thank you Mick I take this as a compliment . As I have described earlier the esseti 200 ac dc machine seems that does not perform well when I extend the tungsten electrode more than 0.5 mm out of the ceramic nozzle . So after years and many hours...

[attachment=0]best1.jpg[/attachment] I have welded this with 55A and it is my best i have done so far , clean base metal 5sec preheat i would try for better . You can be an artist but this does not mean that will aproach this possibility barefoot , without technical knowledge and a good machine to s...

50/50 cleaning penetration , 8.4 cfh of argon flow , Green pure tungsten tig needle grinded lengthwise , 60A current, the minimum pre and post flow . ceramic is 9.5 mm or 1/2 an inch 12.5mm. The starting of HF is bad I have to touch the ceramic of vertical say 80 degrees tungsten needle 1mm to earth...

I have a ESSETI AC/DC tig rahter old must be 9 years ald inveter suare wave welding machine and i try to learn to weld aluminium . i cannot be considered amateur but not a pro either . There is always room for better . This drove me to buy this tig and made a member of this Forum . So when i tig wel...