I'm welding with .035 L-56 wire with a CO2 shielding gas. The material is a 6 inch schedule 40 pipe. I got the root an the fill figured out but when I go to weld the stringer cap it gets all ropey. I've tryed turning down the wire feed speed an osalating slightly but it still Ropes up. If anyone has...

Ok I'll try that. Any ideas about the top part the 9-12 o'clock

im mig welding 6 inch pipe with 0.35 wire with pure CO2 shielding gas.i have a 1/16 inch land an root opening. on 17 volts an 185 wire feed speed. ok heres my problem. on the bottem of the pipe the penetration its cold i get penetration but its all dribbly. an on the top it keeps blowing through an ...

Ok thank you ill give a shot

Is your land an root opening still a 1/8 inch to?

I go to a technical school for welding an I'm havering trouble with smaw on 5g pipe. When I weld from the 6 o'clock to the 9 o'clock position my penatration on my root pass comes out flat instead of a crown. Dose anyone have any advise for me on how I can at least get it to crown? The spacifices are...