Besides appearance, what are the differences from the previous revision?
Just from a glance there seems to be more usable icons present.
Alexa
Search found 356 matches
- by Alexa
- Thu Jun 06, 2013 6:41 pm
- Forum: Welding Forum General Shop Talk
- Topic: What does everyone think of the new look?
- Replies: 37
- Views: 5123
- by Alexa
- Thu Jun 06, 2013 6:27 pm
- Forum: Welding Forum General Shop Talk
- Topic: Forklift fork repair
- Replies: 23
- Views: 5586
Re: Forklift fork repair
Nickn372.
The question of Amish welding only came to my mind after reading your initial post.
But looking around in the cloud ... the following link is dedicated to it and has various points of view. Comment #10 and #15 reminded me of your posts.
http://weldingweb.com/showthread.php?t=56301
Alexa
The question of Amish welding only came to my mind after reading your initial post.
But looking around in the cloud ... the following link is dedicated to it and has various points of view. Comment #10 and #15 reminded me of your posts.
http://weldingweb.com/showthread.php?t=56301
Alexa
- by Alexa
- Thu Jun 06, 2013 5:59 pm
- Forum: Welding Forum General Shop Talk
- Topic: Forklift fork repair
- Replies: 23
- Views: 5586
Re: Forklift fork repair
Nickn372.
Independent of your situation, I found this interesting exchange of welding of forks.
http://www.eng-tips.com/viewthread.cfm?qid=278897
Alexa
Independent of your situation, I found this interesting exchange of welding of forks.
http://www.eng-tips.com/viewthread.cfm?qid=278897
Alexa
- by Alexa
- Thu Jun 06, 2013 11:51 am
- Forum: Welding Forum General Shop Talk
- Topic: Forklift fork repair
- Replies: 23
- Views: 5586
Re: Forklift fork repair
WerkSpace & Nickn372.
Tanks for the input.
Alexa
Tanks for the input.
Alexa
- by Alexa
- Thu Jun 06, 2013 2:40 am
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: my next Project
- Replies: 207
- Views: 31896
Re: my next Project
CraigLam.
Hopefully very low pressure or vacuum.
Enjoy tinkering.
Alexa
Hopefully very low pressure or vacuum.
Enjoy tinkering.
Alexa
- by Alexa
- Thu Jun 06, 2013 2:35 am
- Forum: Welding Forum General Shop Talk
- Topic: Forklift fork repair
- Replies: 23
- Views: 5586
Re: Forklift fork repair
Nickn372. I know next to nothing about the Amish but I am curious if they do any welding. Just read in Wikipedia that powerline electricity is avoided, but diesel or gasoline burner would come in handy shared by the various families. Or an oxyactylene set up. Okay, you and others supply that service...
- by Alexa
- Wed Jun 05, 2013 8:18 pm
- Forum: Welding Forum General Shop Talk
- Topic: Forklift fork repair
- Replies: 23
- Views: 5586
Re: Forklift fork repair
Nickn372. Liability is a big issue here. It would make sense to contact the manufacturer for any repair procedure ... if there is one. As an example, see paragraph 6.2.8.2 on page 12 of the linked document. http://gillisons.com/pdfs/forklift_manual.pdf Curiosity ... how did it break and at what loca...
- by Alexa
- Wed Jun 05, 2013 4:44 am
- Forum: Welding Forum General Shop Talk
- Topic: 3M adhesive tape
- Replies: 3
- Views: 1309
Re: 3M adhesive tape
Werk Space.
That tape is amazing.
Tanks for the video links.
Alexa
That tape is amazing.
Tanks for the video links.
Alexa
- by Alexa
- Wed Jun 05, 2013 1:05 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Fix This.
- Replies: 8
- Views: 1155
Re: Fix This.
NEW WELDING PROCESS About twenty years ago I learned of a new welding process. This was back in '92 if I remember correctly. At the end of each month, we the contractor, try to document as many completed structural welds as possible, in order to collect the monthly payment from the Client. So the we...
- by Alexa
- Tue Jun 04, 2013 4:06 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: MIG repair on an exhaust manifold?
- Replies: 7
- Views: 1449
Re: MIG repair on an exhaust manifold?
Bap.
Tanks for the washer/nut method.
Alexa
Tanks for the washer/nut method.
Alexa
- by Alexa
- Tue Jun 04, 2013 3:56 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Fix This.
- Replies: 8
- Views: 1155
Re: Fix This.
TamJeff. After reading your message and looking at the photo, I wondered if it has ever happened, where one commenter sends in a photo of a weld, and then to discover that the photographed weld was the work of another forum member. Kind of like showing up at the brothel and discovering a friend or f...
- by Alexa
- Tue Jun 04, 2013 3:44 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 533724
Re: The what I welded today (/whenever) thread (pics please)
Mrkil.
Tanks for the update.
Alexa
Tanks for the update.
Alexa
- by Alexa
- Sun Jun 02, 2013 9:34 pm
- Forum: Welding Forum General Shop Talk
- Topic: marketing welding business
- Replies: 3
- Views: 1180
Re: marketing welding business
Wldnfrk.
Ya might leave on and off, some cards at all the welding supply shops too.
Generate a long list of potential clients and send them a flyer and stop by to talk with them.
Socializing, that is face-to-face contact is appreciated.
Hire some kid to put together a website for you too.
Alexa
Ya might leave on and off, some cards at all the welding supply shops too.
Generate a long list of potential clients and send them a flyer and stop by to talk with them.
Socializing, that is face-to-face contact is appreciated.
Hire some kid to put together a website for you too.
Alexa
- by Alexa
- Sun Jun 02, 2013 9:28 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Spray-arc
- Replies: 41
- Views: 8148
Re: Spray-arc
Rake. An amazing experience with various processes and alloys. How many years in the welding field have you got racked up? With that experience, have you assisted in developing welding procedures (PQR and WPS)? Anyways tanks for the input about the SAW. About ten years back, with a vessel fabricator...
- by Alexa
- Sun Jun 02, 2013 8:48 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: sch 80 aluminum pipe
- Replies: 37
- Views: 7132
Re: sch 80 aluminum pipe
CB1127.
How did the penetration look from the inside?
Alexa
How did the penetration look from the inside?
Alexa
- by Alexa
- Sun Jun 02, 2013 10:11 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Spray-arc
- Replies: 41
- Views: 8148
Re: Spray-arc
the gas i was refering to for being pricey is the mixed gas. such as the 90/10, they want around 50$ more for a mixed gas than they would straight co2. stick welding is not an option in any way shape or form with my situation. dont have a big enough generator or a big generator/welder, i dont do en...
- by Alexa
- Sun Jun 02, 2013 12:12 am
- Forum: Welding Forum General Shop Talk
- Topic: Landed a job today
- Replies: 10
- Views: 2331
Re: Landed a job today
Mrkil.
How long would the two jobs run?
If they're short ... perhaps you can do both.
Alexa
How long would the two jobs run?
If they're short ... perhaps you can do both.
Alexa
- by Alexa
- Sun Jun 02, 2013 12:09 am
- Forum: Wish List
- Topic: Stick welding root passes with 7018s!
- Replies: 18
- Views: 4950
Re: Stick welding root passes with 7018s!
Otto Nobedder. For downland (vertical down progression) with 6010, if dragging the rod (with rod pushed constantly in), I do not note a keyhole. For uphill with 6010, I work the puddle and see the gap widening (keyhole)and use a slight up and down motion, while adjusting the arc length as needed. Fo...
- by Alexa
- Sat Jun 01, 2013 7:39 pm
- Forum: Wish List
- Topic: Stick welding root passes with 7018s!
- Replies: 18
- Views: 4950
Re: Stick welding root passes with 7018s!
Chadwarden. Picture in your mind the keyhole you make with a cellulose rod, for example a 6010. A 7018 low hydrogen rod will require a slightly larger *** keyhole. It has less penetration power than a cellulose rod. It solidifies slower than the cellulose rod. Working the puddle will mean ensuring t...
- by Alexa
- Sat Jun 01, 2013 7:25 pm
- Forum: Member Introductions
- Topic: Hi all
- Replies: 6
- Views: 1113
Re: Hi all
Italianwelder.
Is that citoflex (6010)for the root pass ever used downhill (welding from top to bottom)?
How does that PH35-S rod weld compared to other major brands (for example like Lincoln, Esab, Kobe, etc.)?
Tanks.
Alexa
Is that citoflex (6010)for the root pass ever used downhill (welding from top to bottom)?
How does that PH35-S rod weld compared to other major brands (for example like Lincoln, Esab, Kobe, etc.)?
Tanks.
Alexa
- by Alexa
- Fri May 31, 2013 4:14 pm
- Forum: Member Introductions
- Topic: Hi all
- Replies: 6
- Views: 1113
Re: Hi all
Italianwelder.
Welcome.
Please comment.
Probably the welding codes are a little different in Europe than other places across the globe.
Do you do any cellulose rod (6010 etc.) downhill on the pipelines?
Tanks.
Alexa
Welcome.
Please comment.
Probably the welding codes are a little different in Europe than other places across the globe.
Do you do any cellulose rod (6010 etc.) downhill on the pipelines?
Tanks.
Alexa
- by Alexa
- Fri May 31, 2013 12:35 pm
- Forum: Wish List
- Topic: Stick welding root passes with 7018s!
- Replies: 18
- Views: 4950
Re: Stick welding root passes with 7018s!
7018 is a low hydrogen rod that requires that you hold a short arc.
For a root pass, you will have to work the puddle.
There should be able to find some videos.
Alexa
For a root pass, you will have to work the puddle.
There should be able to find some videos.
Alexa
- by Alexa
- Fri May 31, 2013 12:25 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 533724
- by Alexa
- Thu May 30, 2013 1:16 am
- Forum: Welding Forum General Shop Talk
- Topic: Landed a job today
- Replies: 10
- Views: 2331
Re: Landed a job today
Mrkil.
I bet you will never find that qualification test sculpure in any code book.
May want to take a photo to show your kids years from now.
Bye the way ... what process(es) did you use on the test?
Alexa
I bet you will never find that qualification test sculpure in any code book.
May want to take a photo to show your kids years from now.
Bye the way ... what process(es) did you use on the test?
Alexa
- by Alexa
- Thu May 30, 2013 12:58 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 533724
Re: The what I welded today (/whenever) thread (pics please)
Blaz.
Why "Put a small tack on the end of the shaft before you start and make sure you can file it before you make the whole shaft glass hard."?
Tanks.
Alexa
Why "Put a small tack on the end of the shaft before you start and make sure you can file it before you make the whole shaft glass hard."?
Tanks.
Alexa
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities