am not sure if i will be responsible for the painting when finished and yes i had requested material,rod and weld information from the manufacturer but not sure if it will be available.just in case would anyone have info on coating or could regular metal primer and paint would do?

Good day folks,i need your assistance for a job am about to do.i have to weld a hydraulic bracket for a new Kalimar straddle crane being set up.The bracket was welded in the wrong place and will have to be removed and re-welded.would anyone have an idea of the material that makes this and the type o...

Thanks guys, i did the pre heat but no post heating gonna try that.is it possible that the cracks in the factory welds were caused from poor penetration

could any one assist me with this crack issues.Ihave some straddle crane brake fluid coolers to repair that has a crack at the toe of the factory weld it only operates at 8 bars so welded over the crack to seal it from leaking but shortly after my weld cracked in the crown.i ground them out and rewe...

Hey welders, i am a self employed welder from Jamaica and a student of welding tips and tricks.i mostly do aluminum welding but i weld any and every thing weldable wether by mig,tig, stick,oxy-acetelyne, brazing or soldering.I dnt get to do much of the pretty stuff mostly do repairs to dirty oily st...