Search found 257 matches
- by Antorcha
- Sat Jun 24, 2017 2:55 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Quality of welds opinions
- Replies: 17
- Views: 1850
Re: Quality of welds opinions
The bacon fry theory is actually FACT Get a buddy to turn that wire up very slowly as you weld.That spatter will vanish.Wire speed is everything when MIGing.. Even more critical with 100% CO2
- by Antorcha
- Sat May 20, 2017 3:32 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: First beads - no penetration!
- Replies: 26
- Views: 6097
Re: First beads - no penetration!
Take a deep breath. Let the smoke out slow. #1. Forget using a 110 welder on 3/8 steel. Period. #2. Forget using a 110 welder on 3/8 steel. Period. #3. Go get some 1/8 steel.Leave your machine maxed out. Go weld some 1/8 steel. Penetrated purty good didnit ? Ever took a look inside the door on that ...
- by Antorcha
- Fri Mar 31, 2017 6:24 am
- Forum: Welding Forum General Shop Talk
- Topic: Round vs square tubing
- Replies: 15
- Views: 2323
Re: Round vs square tubing
You put that P.O.S. on my truck, you'll be removing it and I'll be moving on.
1.5" OD 15 ga is what I use for stuff like that.At least get a cheapo sq. die tubing roller and follow the roof line a lil.
![Image](http://toolsrack.com/ebay/TubeRollerBender-7.jpg)
They work OK
1.5" OD 15 ga is what I use for stuff like that.At least get a cheapo sq. die tubing roller and follow the roof line a lil.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Image](http://toolsrack.com/ebay/TubeRollerBender-7.jpg)
They work OK
- by Antorcha
- Fri Mar 03, 2017 6:43 pm
- Forum: Welding Forum General Shop Talk
- Topic: Shit Welders Say
- Replies: 8
- Views: 1077
Re: Shit Welders Say
Her's one you never heard.....unless you're old and southunn.
I started a weldin and by the time I were dun that thing were crookit as a broke dikk dawg !
I started a weldin and by the time I were dun that thing were crookit as a broke dikk dawg !
- by Antorcha
- Sun Jan 15, 2017 4:35 am
- Forum: Welding Forum General Shop Talk
- Topic: Cutting and notching, angles and all that. Need some help
- Replies: 16
- Views: 1501
Re: Cutting and notching, angles and all that. Need some hel
I do it a little differently on something like that. Get your angles and cut the pipe as if it were swauare tube, Then go to Lowbuck tools and buy the notcher with the appropriate kit for the tube you'll use.I can bang that rack together in short order with that and some .035 wire in the mig. The on...
- by Antorcha
- Sun Jan 15, 2017 4:23 am
- Forum: Welding Forum General Shop Talk
- Topic: TIG FINGER RIP OFF
- Replies: 25
- Views: 2586
Re: TIG FINGER RIP OFF
I want tig socks so I can weld in my Crocs
- by Antorcha
- Sun Dec 25, 2016 1:47 pm
- Forum: Welding Forum General Shop Talk
- Topic: Need a Welding Table
- Replies: 25
- Views: 2784
Re: Need a Welding Table
All you want/need is absolutely flat. Absolutely level. Absolutely square(or rectangular)
Build it out of whatever you can afford
Build it out of whatever you can afford
- by Antorcha
- Fri Dec 09, 2016 8:11 pm
- Forum: Welding Forum General Shop Talk
- Topic: To grow or not to grow?
- Replies: 15
- Views: 1142
Re: To grow or not to grow?
Grow abilities. Not problems. i have the same three people since 2005 I havent owed anyone since 1997. I can't even rent a car..... No "credit" card. I can buy one in a heartbeat tho.Cash.No work right now. Its the false holy-daze when people piss away money they don't have, for things the...
- by Antorcha
- Mon Nov 07, 2016 6:33 am
- Forum: Metal Cutting
- Topic: New mag drill?
- Replies: 13
- Views: 2162
Re: New mag drill?
Five year warranty
- by Antorcha
- Fri Oct 21, 2016 9:32 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Miller 211 vs Lincoln Power mig 210
- Replies: 4
- Views: 710
Re: Miller 211 vs Lincoln Power mig 210
Get the real 211, not the ToyzRus model
- by Antorcha
- Mon Oct 17, 2016 5:50 am
- Forum: Welding Forum General Shop Talk
- Topic: Strong hand tools magtab failure....
- Replies: 8
- Views: 973
Re: Strong hand tools magtab failure....
Well I ran a weld about 3 inches long and the magnet let go... exact temperature only God knows .. And yes the way to harden steel is to heat it to red or better where it passes the nonmagnetic point and then quenching it in some sort of quenching solution to refine the crystalline structures. I ju...
- by Antorcha
- Fri Sep 16, 2016 9:44 pm
- Forum: Welding Forum General Shop Talk
- Topic: how do you guys feel about tattoos?
- Replies: 52
- Views: 5373
Re: how do you guys feel about tattoos?
i know that many of you call 'tattoos' in welding are the burns you get, which leave a permanent scar, but this isnt that. i'm at the moment 18,thinking of getting some tattoos in the future,i find them beautiful when done right,so i want to get many, most likely legs, arms and back. and i was wond...
- by Antorcha
- Thu May 19, 2016 12:17 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Two pump carts the hard way.
- Replies: 22
- Views: 4892
Re: Two pump carts ther hard way.
While I'm not a fan of 6013, and refuse to use it, you did one heck of a job! As to be expected, of course. If y'all would quit trying to use 6013 as // " ona them thar dragggin' rodzzz" and hold an arc with the thing you might not hate them so much. You hold an arc and crank it a bit and...
- by Antorcha
- Wed May 11, 2016 5:28 pm
- Forum: Welding Forum General Shop Talk
- Topic: Milwaukee portable band saw
- Replies: 34
- Views: 6017
Re: Milwaukee portable band saw
The Makita mounts exactly like the Harbin Fart. Google image for one and build away. It the simplest of them all.welderboy wrote:I want one. I saw MILWAUKEE and DEWALT, but someone has used MAKITA? I read about them http://toolsforwelding.com/hand-held-band-saw/.
- by Antorcha
- Sat May 07, 2016 12:48 am
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: Which welding rods do you use?
- Replies: 21
- Views: 3027
Re: Which welding rods do you use?
OH Man. Hilco Basic on a gen rig. I prefer to run Basic Super on the bench. Ya ready ? I run it on AC :o Try it. You'll like it. Excaliber is like screwing around with a crappy Snap-On Dual 80 when you could use a Wright. It's a fanboy rod. The Starbux of the iron world. Hobarts are great for bendin...
- by Antorcha
- Fri May 06, 2016 9:13 am
- Forum: Welding Forum General Shop Talk
- Topic: Why I have never trusted wire welding
- Replies: 16
- Views: 2164
Re: Why I have never trusted wire welding
I never MIG anything over 1/4-3/8 and don't go after 1/4 with anything less than my MM200.
That said....I love MIG for most stuff. No screwing around, nice and clean. Fast and you can't rip it apart.
Other than roof racks and crap if it goes on a vehicle or real structural item it met up with a 7018.
That said....I love MIG for most stuff. No screwing around, nice and clean. Fast and you can't rip it apart.
Other than roof racks and crap if it goes on a vehicle or real structural item it met up with a 7018.
- by Antorcha
- Tue Apr 19, 2016 9:27 am
- Forum: Metal Cutting
- Topic: Chop saw or band saw
- Replies: 25
- Views: 7117
Re: Chop saw or band saw
YooT00B is full of tune up the HF bandsaw videos. Try it sometime :roll: That said:with My Makita dry 12 or Morse on bigger stuff my helper and I will be home before you get the paint gun out. Accuracy of squareness with either machine would be measured with a feeler gauge. I can cut 10 pieces to on...
- by Antorcha
- Thu Feb 25, 2016 1:38 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: "Upgraded" whip-tip-nozzle
- Replies: 4
- Views: 893
"Upgraded" whip-tip-nozzle
Interesting read.
I always knew that Monkeys Were Blue.......
http://www.designnews.com/author.asp?se ... _id=275312
I always knew that Monkeys Were Blue.......
http://www.designnews.com/author.asp?se ... _id=275312
- by Antorcha
- Sat Feb 20, 2016 11:16 am
- Forum: Metal Cutting
- Topic: Problem with my HyperTherm
- Replies: 8
- Views: 1674
Re: Problem with my HyperTherm
I know EXACTLY what do do !
Pick up a telephone and call tech support at Hypertherm.
Cool huh ?![Cool 8-)](./images/smilies/icon_cool.gif)
Pick up a telephone and call tech support at Hypertherm.
Cool huh ?
![Cool 8-)](./images/smilies/icon_cool.gif)
- by Antorcha
- Sat Feb 20, 2016 11:10 am
- Forum: Welding Forum General Shop Talk
- Topic: Rookie looking for a new welder!
- Replies: 9
- Views: 1238
Re: Rookie looking for a new welder!
Quick + Strong+ 3/8 puts you over the 200~ish amp area in smaller MIGz. The occasional 3/8 is one thing. Much structural in 3/8 or over puts you in 300 amp territory. Quick, in my world, means 1 pass. Now. If you're like the rest of the planet welding 1/8, 3/16 and 1/4 stuff for columns, brackets, t...
- by Antorcha
- Mon Feb 15, 2016 7:44 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: Tig teaches me to stick
- Replies: 10
- Views: 1317
Re: Tig teaches me to stick
You got it. It aint 'bout nothin' but a puddle. Sticks(or whatever they call them this week) are undeniably awesome old things.In the hands of a guy who uses them day in and day out it's amzing what can be done.Choosing the rod and heat and prep are the art. The system is fully capable. Many current...
- by Antorcha
- Fri Feb 12, 2016 5:00 pm
- Forum: Metal Cutting
- Topic: Plasma Truth 101
- Replies: 5
- Views: 1547
Plasma Truth 101
After bitching at plasma for many years this video FINALLY gets made that spills the truth. Listen carefully if you're new to this or considering opening the wallet to get into it. It's what all the salesman "forget" to mention. " OH. You have air ? " Duhh Yeah. You're ready to g...
- by Antorcha
- Wed Feb 10, 2016 12:54 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: How does my weld look
- Replies: 12
- Views: 1267
Re: How does my weld look
One thjing. When you re-load that machine set it up with .030 wire.035 is better when you screw with 1/4" or better a lot.
You'll see a difference in penetration immediately on stuff like you're messing with.
You'll see a difference in penetration immediately on stuff like you're messing with.
- by Antorcha
- Mon Feb 08, 2016 8:51 pm
- Forum: Member Introductions
- Topic: Intro from a motorcycle builder
- Replies: 7
- Views: 425
Re: Intro from a motorcycle builder
You can already arc weld some so why not just watch a bunch of videos and start building some crap with the 140 ? Start with the welding cart Jody just did videos on, build some shelves and stuff and you'll get better in better in a fairly short time frame. Better than sitting in a phone booth apply...
- by Antorcha
- Sat Jan 30, 2016 12:45 pm
- Forum: Metal Cutting
- Topic: Looking to buy metal saw..
- Replies: 43
- Views: 8829
Re: Looking to buy metal saw..
Not having seen these Dry Cut saws I will say I'm impressed, I've been looking at the Portaband saws with the Swag Offroad table and now think one of these would be a better option. For those of you that have used the Evolution brand They have a Rage2 for around $189 and the Evosaw380 (old Rage3) f...
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities