Ok I will try to keep this as short as possible. I have had problems with this machine from day one, It has never welded smooth, it has bad arc wander and always acts like the Gas is off. Really bad pourosity. 480 volt also tried 220,208,110 Argon (and is on and flowing) also tried weld mix. Clean ...

How are you verifying your gas flow? I don't know if Miller still sends pressure gauges with there gas welders but they need to be switched to a flow-meter asap. It really sounds like a gas flow problem. Hi, Not sure about the US. but I just picked up a brand new dynasty200dx from miller agent and ...

lazerbeam wrote:How are you verifying your gas flow? I don't know if Miller still sends pressure gauges with there gas welders but they need to be switched to a flow-meter asap. It really sounds like a gas flow problem.

I guess I'm taking the Gauges word for it.
It really does act like it's gas related.

I have tried everything from really low to cranked up. Yes, no leaks Hi Zack Might sound daft but do you have the correct size collet in, and also check the torch head and confirm the tungsten is centerd in the cup, I had same type of issue and did not realise the collet was wrong size and that cau...

I have tried everything from really low to cranked up.
Yes, no leaks

Ok I will try to keep this as short as possible. I have had problems with this machine from day one, It has never welded smooth, it has bad arc wander and always acts like the Gas is off. Really bad pourosity. 480 volt also tried 220,208,110 Argon (and is on and flowing) also tried weld mix. Clean m...