Lol I am the operator error apparently you can hook them up backwards it was news to me.

It was when Arizona ask how the hoses where hooked up that I took a closer look. Here is the picture before I changed the gas hoses. (the one that goes under the welder is hooked up to the argon bottle. I think all the problems are fixed with this welder I think it is all operator error now. I will ...

It was wondering how the torch was hooked up. The machine is running a lot better now I have not sure what did it but all the changes have made the machine a ton better!

Okay, after looking closer to make sure it was hooked up right the gas hoses where flipped. Now when I turn the welder off it will turn the gas off to, so so nice!!!

I see note taken

I had High frequency start in the continuous position and switched it to start only seamed to help a lot, not sure if it was just me though? It is an older model and I do not think it has a water cooler, but it dose have a water in water out line im guessing to a valve? July 1991 ish KB076607 throug...

I Have Both Switches In Remote 14 And Gas JuSt Keep flowing

Thank you

Will do has been welding better I think some one scratch started with this tungsten.

One other thing the foot pedal is not turn the gas on and off.... is this normal or is there a valve that is not closing?

Okay so report I moved ac balance into the balanced range... weather or not it has any difference im not sure... but I did also regrind my tungsten and cut off a 1/2" seamed to make a huge difference!!! apparently I had some contamination because when I would run a bead it would look oxidized a...

True I think I will stay away from them in my applications too because if they get hot they are not grounding good.

HAHA that is true... I just was thinking inside a plant more so you dont have to worry about a battery staying charged or dropping a load.

Yes sorry I have the foot petal RC-14 hooked up, also just got done reading that I need to move AC balance to around 2 for square wave.

Also what is the easiest joint to practice on?

One thing I have to say is cold saws are nice, I even used one mounted on a machine why hydrological feed to cut tubing to length, one bad thing is if your cutting tubing and this is most of what I did, spend most the time dumping the coolant out of the tube. and the little pumps most of them have w...

Hey guys I am totally new to tig welding beside just trying it on my own. I have a Syncrowave 350 with a Diamond back wp26 torch I don't plan on welding anything to heavy any time soon. 1/16" (red) tungsten flowing 13 CFH and a #5 cup Here is my question I am welding 14/16 Ga mild steel and I d...

how do those magnets work on alum or SS?

alright I didnt know if there was one you use more than the others... the magnets just seam like they cant lift much weight

Hello,
I was wondering how you guy move big plate and parts either flat or boxes? what type of material handling clamps and magnet you use?

If you get a Hobart mega mig it will already have the switch.

that is an amazing cut for free hand!

I would think that spray would be faster, then again I have never got the opportunity to work with pulse.

I think oxy-fuel would be even straighter than that and the top edge would be just slightly rounded. dosnt mater what it looks like, it looks good.

This is a very very thick cut for hy-definition plasma at 2" about how much taper do you guys have on that (3/16")? Very interesting on the ripple pattern as well. At 2" I would of thought it would of been cleaner to cut it with oxy-fuel to get a straighter line, although I am new to ...

HAHA sounds good, Thanks

Hey guys I have a syncrowave 350 and it dose not have the pulse function.... How hard is it to add this board to the welder? would it be worth upgrading?

Thought on where to get it and what all is involved.

Thanks,
Jason

I just got the manual from Hobart. they say its used for air gouging. It would be cool if it could stick weld as well.... I would be happy just getting good mig welds out of it right now.