Now are you looking for a commercial table or are you looking for a small 4x4 or 4x8 table, If you are looking at large industrial tables. As far as the plasma if you are going to HD I would look at Kaliburn they have some amazing plasmas, I have seen parts off both and from what I have seen the Kal...

I figured they would, dose it sound different than the single phase welders? more of a humming?

With the dimension it looks like it can only do dc tig.

Hey guys dose any one have experience with the miller deltaweld and dimension just wonder if the dimension funcions as well as the deltaweld since that is all it is designed for, looking in the 300 amp range. We just need something bigger than our MM251

Thanks,
Jason

Thanks,
I am always intrusted by equipment.

I was guessing it was going to be around 130 we are wanting 4 roll full cnc

I was wondering who would be good for a larger size roll probably 3/8"x10' maybe even 1/2"x10'

Is anyone rolling plate?

Hey guys, What are the best plate rolls on the market Davi? Mongomery? Webb?
Any input is helpful, thanks!!!

Hey guys,

I was just looking around at welders and hear a lot of people talking about millers pipe worx. How they use a RMD process Regulated Metal Deposit. How is this different from the rest of the welders??

Thanks,
Jason

I have talked to a few gas suppliers in the past 90/10 they say is the breaking point for spray any lower and its really hard to transfer that being said they did say that 90/10 should transfer nice but the higher you go the easier it is to transfer such as 95/5 or a 98/2. How long have you had the ...

Kinda what I am seeing with the press brakes mainly, I like how the tooling holders can be moved around to make taller pans with out having to use the c frame sides or really really long tooling.

Also like the fact bystronic and amada both have angel detection systmes.

Hey guys, looking at new press brakes it time to replace our 65 ton press hoping to get atleast 180 ton with 10ft between frame, what brands do you guys like or use? Any other brands looking.

Amada
Bystronic
Trumpf
Accu-press
Cincinnati

Will do thanks, I got my 1/8" hole looking great going though 1/2" plate.

Is it me or dose it look like that nozzle is showing off center burn markers?

Okay I got it figured out with the peck function. Has anyone had luck power piercing through 1/2"? How long dose it take you to pierce 1/2"?

Hey guys I was wondering if there are any laser operators or owner here? I am having some issues cutting 1/2" holes in 1/2" plate without welding it on the back.

Thanks,
Jason

Sorry for joining the party late, and I am sure that you have already done this job.... but it is not recomened to cut underwater with HD plasma if edge quality is what you are worried about.... it can do it because it uses HF starting but cutting underwater is not something that is practiced by man...

Worked great, I am using a little bit different set up I have a full CNC HD plasma table. Im so use to having a cnc I forget that plasma has the option to be hand held.... my bad.

Water jet will not have corrosion issues because its cut with abrasives and water instead of a gas mix. But because of speed will be a fair amount more expensive.

Sounds like Miller it is!!! HAHA.... to me they seam to run smoother... maybe its just me....

LOL I have never seen anyone use a paper clip for filler......

As far as finding some one I can not really help you there. But as far as machines and how they operate I should be able to help you. As far as the machine.... thickness dose not really matter if its .100 or .125 unless you want them to supply materiel some places stock different things but as far a...

Really depends on thickness.... anything 1/2" and under a laser will be the best cut..... but HD plasma should be good as long as they are running the machine right!!! if they add oxygen it will actually oxidize the stainless and can rust this can also be said about laser if they are on an unde...

as far as the electric its all based of kwh so they are the same to run I was mainly wondering if it is smoother? The electric isnt to bad to add to run our big old hobart mega mig it take 35.5 amps at 480 volts 3 phase 70 amps at 240 3 phase but to run it we pay the same because its based on kwh......

Thats kinda what I was wondering if there 3 phase 100% units are much different as far as the arc or if they are better or not?

whats really the difference beside they are build heavy?