That's a nice job on yours with no filler. I never even considered no filler. Ill try that next time.


Sent from my iPhone using Tapatalk

Sorry, forgot to add the picture!


Sent from my iPhone using Tapatalk

Second shot at razor blades. 1/16 tungsten and filler. Set machine to 25 amps and used a foot control, not sure about exact amps


Sent from my iPhone using Tapatalk

Ck Flex-loc 150 air cooled with super flex cable. Great torch, just keep the super flex hose away from a fresh bead. Learned that the hard way.


Sent from my iPhone using Tapatalk

Sorry Dylanwelds, I didn't notice that was the video I was talking about.


Sent from my iPhone using Tapatalk

Fieldres has a very knowledgeable YouTube video on this subject. I have done some testing on his theory and now use it daily. It basically is about amperage versus current. On your fine adjustment the lower the number the lower the voltage, which would be better for a 7018. The higher the number the...

I repair boilers and piping in central Florida. My company is required to carry an R stamp to weld on the pressure vessel itself, or in piping between the boiler and the first header valve. I must be, and am certified to weld on those areas and related piping. (6g sch120) To weld after the first hea...