Im going to play around with the ac balance later to see if it changes. I'll let ya'll know what i come up with hopefully tomorrow. Thanks

My ac balance does not have #s its just cleaning or penetration then auto. But it still does not make cents, I have used my original setting before stick welding with no problems. That's why I thought it might be in my welder, but anyway thanks for everyone's help so far maybe something will work out.

My ac balance was on auto and also my tungsten was an 1/8 in that last video

Ok turned down the argon but still the same. I made another video turned my shade up so u can see the ark a lot better. This figures I'm right in the middle of a project to make pans. Its hard to explain but it like the ark pulsates and I don't have it on. I never had this problem before, I tried st...

Ok I'm having problems with my Lincoln precision TIG 225 while I'm welding aluminum. Amps r at 80, pure tungsten 3/32, and # 7 cup. The ark is very erratic and unstable. I can still weld but it not a smooth ark and now its melting my tungsten. I have also used different tungsten but same effect. the...

We'll this pass weekend I pulled my welder our cleaned my drive rollers, blew all the dust out, and took my old school clamp and filed all the slag off to new metal. I took y'all's advice and stated low 17v/ 200 wire speed and that was too low of wire speed then I bumped it up to 210 and that was th...

I've been welding for over 13 years and I when I worked at our local college I had no problems but my welder I just have trouble does single phase and 3 phase play any roll in it?

Hello everyone first post glad to be here. Anyway I have a Miller Millermatic 251 and no matter what setting I use I get a lot of spatter. I'm using argon 85 & co2 15 gas, ESAB .035 wire, and a tweco mig gun (I don't think that matters). I have also use argon 75 & co2 25 gas but still lots o...