Jody has a few good videos on 6010.
I was told a good rule of thumb is each whip up and back to the puddle should only take about a second. Don't know if it's true or not, but seemed to work for me.
Sent from my SM-T537R4 using Tapatalk
Search found 239 matches
- by 79jasper
- Sat Nov 01, 2014 1:49 am
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: First whip and pause beads
- Replies: 4
- Views: 1125
- by 79jasper
- Sat Nov 01, 2014 1:46 am
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: Amperage for pipe welding
- Replies: 14
- Views: 9168
Re: Amperage for pipe welding
^ Same machine. We were using 1/8 gap and land, and were told to run like 55-70 amps, which I thought was supposed to be way to cold, but that's how we did it. I tended to run on the higher side of things. I went even hotter if I was trying the "bury rod" method. Sent from my SM-T537R4 usi...
- by 79jasper
- Sat Nov 01, 2014 1:42 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Backwelding pipe
- Replies: 18
- Views: 3420
Re: Backwelding pipe
On steel, to get root reinforcement on the back with the lay wire, I have to slightly shove the filler into the puddle. Takes a lot of practice (I need more) and many tungsten resharpenings later, but eventually you'll get it. I have no experience with through the pipe, but would like to try one day...
- by 79jasper
- Fri Oct 31, 2014 1:30 pm
- Forum: Welding Forum General Shop Talk
- Topic: clear (Pyrex?) TIG cups-opinions?
- Replies: 18
- Views: 13823
Re: clear (Pyrex?) TIG cups-opinions?
I don't know how I missed that.
His are Pyrex also. But you can get the BBW cup with the protector on it. Looks nice.
Sent from my SM-T537R4 using Tapatalk
His are Pyrex also. But you can get the BBW cup with the protector on it. Looks nice.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 31, 2014 2:12 am
- Forum: Welding Forum General Shop Talk
- Topic: clear (Pyrex?) TIG cups-opinions?
- Replies: 18
- Views: 13823
Re: clear (Pyrex?) TIG cups-opinions?
I've been poking around Instagram a bit and furick cups are being shown a lot with very positive feedback. Lots cheaper than others too Sent from my iPhone using Tapatalk The guy that makes them is Michael Furick. But I can't find any info on them. Sent from my SM-T537R4 using Tapatalk Edit: Haha f...
- by 79jasper
- Fri Oct 31, 2014 1:37 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig welding aluminum questions......
- Replies: 10
- Views: 926
Re: Tig welding aluminum questions......
I haven't done any aluminum yet.
But from what think, dsmabe pretty much hit it right on. Especially the torch angle part.
A pic is worth a thousand words.
Sent from my SM-T537R4 using Tapatalk
But from what think, dsmabe pretty much hit it right on. Especially the torch angle part.
A pic is worth a thousand words.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 31, 2014 12:19 am
- Forum: Welding Forum General Shop Talk
- Topic: clear (Pyrex?) TIG cups-opinions?
- Replies: 18
- Views: 13823
Re: clear (Pyrex?) TIG cups-opinions?
Also been looking at those.
Seen one on instagram where a guy used a beer bottle neck. Lol
Sent from my SM-T537R4 using Tapatalk
Seen one on instagram where a guy used a beer bottle neck. Lol
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Thu Oct 30, 2014 2:06 am
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: passed my first bend test
- Replies: 5
- Views: 744
Re: passed my first bend test
Nice!
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Thu Oct 30, 2014 12:54 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 498125
Re: The what I welded today (/whenever) thread (pics please)
That's a scary thought with how some people try to rig things. Lol
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Thu Oct 30, 2014 12:44 am
- Forum: Education Opportunities
- Topic: Hi freq or downhill at Tws
- Replies: 6
- Views: 2184
Re: Hi freq or downhill at Tws
So apparently we can do both, but it's not the whole shebang of both, and still crammed into 3 weeks.
Can also do one, then come back for help on the other.
I'm going to do HF. But im fairly tied down, so pipeline traveling doesn't interest me that much.
Sent from my SM-T537R4 using Tapatalk
Can also do one, then come back for help on the other.
I'm going to do HF. But im fairly tied down, so pipeline traveling doesn't interest me that much.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Thu Oct 30, 2014 12:40 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 498125
Re: The what I welded today (/whenever) thread (pics please)
What is that, a boat?
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Wed Oct 29, 2014 5:56 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Portable SawMill
- Replies: 54
- Views: 11878
Re: Portable SawMill
A video I watched on the wood mizer, he was using washer fluid to keep from freezing, and plain water when it was warmer.
Also the same videos, the machine had a gauge showing blade tension. Which is a good indicator of blade temp.
Sent from my SM-T537R4 using Tapatalk
Also the same videos, the machine had a gauge showing blade tension. Which is a good indicator of blade temp.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Wed Oct 29, 2014 5:53 pm
- Forum: Welding Forum General Shop Talk
- Topic: Cable Storage
- Replies: 17
- Views: 2483
Re: Cable Storage
Build one like the garden hose type from steel or aluminum?
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Tue Oct 28, 2014 2:47 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Lookie what I got today!
- Replies: 26
- Views: 3678
Re: Lookie what I got today!
Nice.
Water cooled and all.
Sent from my SM-T537R4 using Tapatalk
Water cooled and all.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Tue Oct 28, 2014 2:39 am
- Forum: Member Introductions
- Topic: Need help on research paper
- Replies: 4
- Views: 490
Re: Need help on research paper
I think to be successful you have to have a passion for welding.
From what I've seen/heard, you never stop learning new things as you go.
But currently I'm just in school also.
Sent from my SM-T537R4 using Tapatalk
From what I've seen/heard, you never stop learning new things as you go.
But currently I'm just in school also.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Mon Oct 27, 2014 12:14 am
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Removing Broken Skid Plate Bolt
- Replies: 41
- Views: 4617
Re: Removing Broken Skid Plate Bolt
Yeah, I've never had any luck with "easy outs." More like break off and piss you offs. Lol Idea behind left hand drill bits is it may catch and turn out. If it's not a blind hole, a normal drill could spin it on through also. (Long as no shank or shoulder is left) I've heard good things ab...
- by 79jasper
- Sat Oct 25, 2014 11:16 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Portable SawMill
- Replies: 54
- Views: 11878
Re: Portable SawMill
Lol. Options options.
And yeah, if the wheels can be bought cheaper than your time and money to build them, by all means.
Sent from my SM-T537R4 using Tapatalk
And yeah, if the wheels can be bought cheaper than your time and money to build them, by all means.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Sat Oct 25, 2014 10:50 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Portable SawMill
- Replies: 54
- Views: 11878
Re: Portable SawMill
That's cool. Those 3 cylinder are efficient and don't use much gas.
You could make your own wheels with some big diameter pipe.
Sent from my SM-T537R4 using Tapatalk
You could make your own wheels with some big diameter pipe.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 9:46 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Portable SawMill
- Replies: 54
- Views: 11878
Re: Portable SawMill
I get using a smaller engine to save space and weight, but why not a smaller diesel? A 4bt Cummins may be a bit big, but there's other options.
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 2:32 pm
- Forum: Member Introductions
- Topic: Hello from broken arrow!
- Replies: 8
- Views: 623
Re: Hello from broken arrow!
Oh, I am on the last row by the grinders. Lol
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 2:34 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: how many passes
- Replies: 9
- Views: 1117
Re: how many passes
I did 2 cap passes on mine. Used 3/32 filler.
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 12:54 am
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Portable SawMill
- Replies: 54
- Views: 11878
Re: Portable SawMill
Pretty cool. Was watching some videos on the tube of the wood-mizer. Thing is sweet.
Not too horrible on price, but the DIY route would be better for personal use.
Imo, the wood-mizer is better for selling wood for profit.
Sent from my SM-T537R4 using Tapatalk
Not too horrible on price, but the DIY route would be better for personal use.
Imo, the wood-mizer is better for selling wood for profit.
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 12:50 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: how many passes
- Replies: 9
- Views: 1117
Re: how many passes
On 2 inch tig all out, my instructor said he only allows 2 cap passes(2g). Won't grade it with 3.
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 12:46 am
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: TEST STAND
- Replies: 4
- Views: 3439
Re: TEST STAND
Jody recently had a device in his videos. Not sure on price.
Sent from my SM-T537R4 using Tapatalk
Sent from my SM-T537R4 using Tapatalk
- by 79jasper
- Fri Oct 24, 2014 12:43 am
- Forum: Education Opportunities
- Topic: Hi freq or downhill at Tws
- Replies: 6
- Views: 2184
Re: Hi freq or downhill at Tws
To me it's dumb that we can't do both.
I think I'll rephase and do both.
Personally I think it's better to have both.
Sent from my SM-T537R4 using Tapatalk
I think I'll rephase and do both.
Personally I think it's better to have both.
Sent from my SM-T537R4 using Tapatalk
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities