Yep

Sorry to here that

And I am on all those

No

I live near Greenspoint mall and I'll travel up to 50 miles one way

It is not mig it is flux core

It is not the most common process. I thank it is a api speck just don't know witch one it is. It is on 4140 tool still and in the 1g position rolled out by hand.

Hobart extreme B2

Could not get the other wire any more shade to switch

the wire I was using before this one did not do this ever and I was using v grove

^ what????

It was not the roller being old it is an deferent tips of roller that you need for flux core

OK so I have been welding for 8 years and I am not certified for any type of process. Do you think it would be good for me to go get any kind of service certification that I can get. I thank I can pass a test just don't know what kind to go and take or what I should take.

So I got is fixed it was the rollers the one on the right is what I had in the machine and I switch to the black one on the left it works perfectly now

I hope so

Man it is really getting to me

I welds bad if it is in DCEP and good in DCEN. I know that is set up the right way. I replace the drive rollers earlier this year they're practically brand new still.
They are just tight enough to barely move through my glove it is also only double roller system.

Yep have that chart and it is 25.5 at 375 ipm 72/25 gas at a 35 flow the stick out is about 1/2 inch. It will do this with a new one or old.

DCEN is the way it is set up. I have been using this for about 6 month. It has done this from day one and it is getting old. When in am welding it locks like the fix is melting out of the wire before it gets to the puddle. I thank it is going back to the tip and burning the inside of it.

Has anybody used this wire

FabCO EXTREME B2
E81T5-B2M H8

I'm having a problem with this burning through tips with in minute of changing it.

Flux core ,mig, tig,stick. I can do it all just have not used sub arc.
I have been welding 4140 tool still. I have dune ss and inconel and chromium just not a lot of it

I am locking for a new job and it is not going vary well. I have put numerous applications in and have not received any emails or anything if anybody knows of any re welder please let me know.

Thanks Matt

Thanks

Has anyone taken this test . If so what is the requirement