But the torch connector plug is for sell on the internet, so you can just get that.

it is only the footpedel connector that i can not finde.


/Tooms

Hi you can easily finde the torch connector at webshops and ebay, but i have not been able to find the one for the foot pedal. The part numbers are listed on the item i have. Tig Torches connector: "Amphenol MS-3106A-16S-1PZ-ST5-624-9 15 15" Footpedal connector: "Amphenol MS-3106A-16S...

Hi i am sure that i have rad that it is 10k some where on the net. i dont have an torch with amp control so i can not see that but i have an foot pedal and that is an 10k pot. one thing to note if you have you own control, the torch and foot pedal connetor on the kemppi looks to be the same 7pin, bu...

here is an link to the pdf
http://www.tooms.dk/Download/forum.weld ... iagram.pdf

hi


i found this pdf somewhere with the info about the torch wiring.

edit: the forum dont allow the pdf file, so i will have to upload it first to another place.


Thomas

TRACKRANGER wrote:

Tooms wrote:Copenhagen, Denmark

Tooms,
Ahhh, ligesom sangen: vidunderlige, vidunderlige, København

ja ser ud til at du kan dansk

I dont have watercooler on mine, so dont know it.

try ask the place that you get the gear from what you need and what parts there is need to connect it.


/Tooms

Who did you buy the CK torch and adaptor through? Im looking at a couple of options. I think I might buy a CK micro torch due to its flexibility for stainless work and maybe persevere with the big 250W, the big kemppi torch considering its not a flex head isnt THAT bad to use its better than most o...

Hi

yes and there for i have also got an CK worldwide flexloc130 with an adaptor with mine.

if you have not seen the video then in the end of video 1 i show the ck torch and the adaptor to connect it.


/Tooms

Copenhagen, Denmark

Hi Otto

i was abit unsure if it was okay to post them here or it was seen as an spam post.
it is just an private person review of new gear and i do not sell anything.


Thanks
Thomas

I got this grinder used and has made an small review of it. The grinder is made by Inelco Grinders A/S as Neutrix and it is also seen rebrand as: Migatronic Green Pointer X2 Handy Point Plus Tungsten Grinder Radnor Portable Tungsten Grinder Anchor Brand 88896020 PORTABLE TUNGSTEN GRINDER Linde Porta...

Hi guys I am new to tig welding and have about one month ago got my self an Kemppi 2300 ac/dc tig welder, i was not finding many reviews on it on youtube so i have there for made a review. My new Kemppi MasterTig MLS 2300 ACDC TIG welder – Part 1 of 2 BtBJFYOO0uc My new Kemppi MasterTig MLS 2300 ACD...

Hi

Thanks for the good advise and i try do that first when i have the welding cart ready.

Thanks alot.

Thomas

Thomas, Check this thread out before you make any purchases. http://forum.weldingtipsandtricks.com/viewtopic.php?f=5&t=4561&hilit=Gas+surge -Jonathan Hi Johathan thanks for the link to that thread and if i am reading it correctly then it is helping to have a better flow meter, move it close...

hi MosquitoMoto

that makes good seens to keep the hose short and i think the hose there is with the machine is 1.2meter, so when i have build my welding cart/trolly then is will make is as short as i can.

Thanks
Thomas

Hi AndersK i was planing to buy a better flowmeter then the one i have and was thinking that maybe using around 50-80£ but if the gas saving flow meter is working then i think it is okay to pay some more if they are working and i can have some gas saving in the long run. I am using the gas saver len...

Hi sorry if i am writing something wrong, i am an newbie and is just started ;) the flowmeter/regulater that i got is just the cheap entry model that i got from the gas firm with my bottle and the cost was just around 25-30£, so it is likely not an super good one but it seems to work. i have now use...

Thanks alot guys, it help me. from the post in the other forum that Gavin link to, there is an pdf with this information. No cable changes • Change from ( MMA … TIG ) • Change between current types ( DC- … AC ) • Change between polarities ( DC- … DC+ ) • Earth cable always in minus pole ( - ) so tha...

hi Jack thanks alot for your reply. the main reason that i asked is because that i understand from Jody videos that you normally can connect the wires there wrong way up and the do welding but it is working very badly and it is an common mistake that newbe makes, so i i trying to make sure that i ha...

hi first i am total new to tig and have just got my Kemppi MasterTig MLS 2300 AC/DC. the queastion is, on this machine the torches is connected to it own connector with gas and then there is two dinse35 connector, one plus and the other is minus.. so i connected the ground clamp to plus and tryed bu...

Thanks guys

i will start buying

1pk of 4043 1/16
1pk of 4043 3/32
1pk of Er70s2 1/16
1pk of Er70s2 3/32

that is a good link to that calculator, i will look more at that one.


Thanks
Tooms

sorry guys i am not an spammer or have not anything todo with that webshop other then i was looking at the list of filler rods and was unsure about what to select. yes by tig filament i mean filler rods. Thanks TxBigRed, i start with them and then just wait with the ones for stainless until i have l...

Hi I am saving up to soon buy me an tig welder and is looking at all the other things that i need to begin learning tig. I have been looking at what tig filament that i need as a beginner but there is so many types and sizes that it get me abit confused to what will be an good beginners kit of filam...