Search found 74 matches
- by Harry72
- Wed Oct 28, 2015 9:34 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Torch tip for fellow noobs
- Replies: 18
- Views: 1822
Re: Torch tip for fellow noobs
I had a look at Riverweld, prices seem impossibly cheap for the whole lot they're rating them at 200amps my machine is 210 so if I crank it will it smoke? Wouldnt surprise me if thats where my current torch comes from :lol: it seems excessively heavy with extended use, the cable/hoses are not real f...
- by Harry72
- Tue Oct 27, 2015 6:52 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Torch tip for fellow noobs
- Replies: 18
- Views: 1822
Re: Torch tip for fellow noobs
I've looking at getting a 20 series for mine, small 9 size with a good 200ish amp capability(watercooled obviously)but been having trouble gettin me mits on one. I tried Everlast Australia to order one from the main Everlast mob but they cant or wont for some reason :roll: I dont have a local WS wit...
- by Harry72
- Fri Oct 09, 2015 10:05 am
- Forum: Member Introductions
- Topic: Hi from Sydney!
- Replies: 27
- Views: 2523
Re: Hi from Sydney!
I lashed out on green, 210 EXT and WC300
Havent had any trouble yet, still not 12 mths old yet
Havent had any trouble yet, still not 12 mths old yet
- by Harry72
- Sat Sep 19, 2015 6:17 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: best way to blend helium to argon
- Replies: 41
- Views: 2995
Re: best way to blend helium to argon
This maybe a silly question but, can you use the helium gas from a party balloon kit... would it be pure helium?
- by Harry72
- Mon Sep 07, 2015 9:29 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 499985
Re: The what I welded today (/whenever) thread (pics please)
Discovered a badly cracked weld in one of my under tray boxes, I found it when all my tie down gear for my ute(tray back mini truck) got soaked. They've been under my ute tray for about 3yrs, Chinese ebay specials supposed to be 1.6mm(1/16th) aluminum... more like 1mm This is my first real bit of al...
- by Harry72
- Mon Sep 07, 2015 6:48 am
- Forum: Welding Forum General Shop Talk
- Topic: Famous sayings...
- Replies: 81
- Views: 8396
Re: Famous sayings...
Off like a bucket of prawns in the sunday sun
Tonguing like a lizard for a draught(beer)
Go root yer boot because there's a big c**t in them
Tonguing like a lizard for a draught(beer)
Go root yer boot because there's a big c**t in them
- by Harry72
- Mon Aug 31, 2015 7:49 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Time for a #9 torch - opinions?
- Replies: 28
- Views: 2453
Re: Time for a #9 torch - opinions?
Kym I've had the same problem(yep I be a noob too) my machine come with a WP18 that was the "Euro" style handle, I was talking to a guy in a specialist welding shop about buying a whole replacement torch and he said you can fit a yanky style straight handle and a micro switch to it keeping...
- by Harry72
- Sun Aug 09, 2015 12:59 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Affordable argon for Aussies?
- Replies: 42
- Views: 3479
Re: Affordable argon for Aussies?
I'd love to buy a bottle but unless you live in a larger city the transport cost's outweigh the rental. BOC last slugged me 192 for rental and 198 changeover (E size), I've heard "BYOB" E size is about 160ish changeover so its definitely cheaper the freight is the killer, they want 100 per...
- by Harry72
- Fri Jun 12, 2015 6:00 am
- Forum: Welding Forum General Shop Talk
- Topic: International roll call!
- Replies: 54
- Views: 5356
Re: International roll call!
South Australia, Port Pirie... lead city!
- by Harry72
- Thu Apr 09, 2015 6:21 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 499985
Re: The what I welded today (/whenever) thread (pics please)
Needed a trolley for the new 7x12" bandsaw, need it to be easy too move about... shed is never big enough :( Bit of a noob on the tig only on my 2nd bottle of gas so far, learning as I go as there's no one around these parts to learn from :mad: Jody has been my main influence... even in choice ...
- by Harry72
- Sat Apr 04, 2015 6:48 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Jody's welding cart project.
- Replies: 19
- Views: 3784
Re: Jody's welding cart project.
Im a master... FIGJAM
- by Harry72
- Tue Mar 24, 2015 7:21 am
- Forum: Welding Forum General Shop Talk
- Topic: Who else works 6 and 7 day weeks?
- Replies: 19
- Views: 1606
Re: Who else works 6 and 7 day weeks?
4 on 4 off 12hr shifts (2 days + 2 nights)
I get a long week end every week end but may not actually be a week end by the calender!
I dont weld for a living, I refine metal for a living
I get a long week end every week end but may not actually be a week end by the calender!
I dont weld for a living, I refine metal for a living
- by Harry72
- Wed Mar 11, 2015 6:36 pm
- Forum: Video Discussion
- Topic: Gravy TIG Welding
- Replies: 6
- Views: 1372
Re: Gravy TIG Welding
The machine is fine... its the operator who is defective
- by Harry72
- Wed Mar 11, 2015 12:15 am
- Forum: Video Discussion
- Topic: Gravy TIG Welding
- Replies: 6
- Views: 1372
Re: Gravy TIG Welding
Yep that is the new 210ext... same as mine my welds dont look that good though
- by Harry72
- Sat Feb 28, 2015 9:30 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: steel black welds
- Replies: 21
- Views: 1982
Re: steel black welds
You will never have good results if you dont start with nice shiny steel... all the steel in your pictures has not been cleaned!sshh wrote:made some practice on steel, then welded two parts this is the result
- by Harry72
- Sun Feb 15, 2015 7:00 pm
- Forum: Welding Forum General Shop Talk
- Topic: The Rogues' Gallery
- Replies: 323
- Views: 42605
Re: The Rogues' Gallery
Hey I found one... my excuse is its on a night shift about 3 in the morning :lol: https://scontent-sin.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/205137_1684625392415_5959945_n.jpg?oh=311b2e29bcfb74c5ff04d7b33331ae14&oe=554B7DC3 Found one a bit more sensible ;) https://scontent-sin.xx.fbcdn.net/hphotos-...
- by Harry72
- Sun Feb 15, 2015 6:55 pm
- Forum: Welding Forum General Shop Talk
- Topic: The Rogues' Gallery
- Replies: 323
- Views: 42605
Re: The Rogues' Gallery
You know what I cant even find a picture of me... might have to raid the wedding photos
- by Harry72
- Sat Feb 14, 2015 5:10 am
- Forum: Welding Forum General Shop Talk
- Topic: AWS Awards Jody
- Replies: 41
- Views: 3571
Re: AWS Awards Jody
With thanks to Jody I have the only tig welded letter box on my street
Only learnt from Jody and a few others online, using his advice as a knowledge base really does help us newby's
Only learnt from Jody and a few others online, using his advice as a knowledge base really does help us newby's
- by Harry72
- Fri Jan 16, 2015 3:09 am
- Forum: Metal Cutting
- Topic: newbie asking newbie questions
- Replies: 10
- Views: 1619
Re: newbie asking newbie questions
Has anyone tried one of those coldcut saws that are based on a abrasive cut off saw?
http://www.makita.com.au/products/power ... utting-saw
http://www.makita.com.au/products/power ... utting-saw
- by Harry72
- Sun Dec 14, 2014 7:21 am
- Forum: Welding Forum General Shop Talk
- Topic: Incorrect Terminology
- Replies: 29
- Views: 2210
Re: Incorrect Terminology
You guys shouldn't ever take up woodworking the incorrect terminology gets even worse!
- by Harry72
- Sun Dec 14, 2014 3:50 am
- Forum: Suggestions, Feedback and Support
- Topic: Unique little layout square I started making
- Replies: 11
- Views: 2822
Re: Unique little layout square I started making
You can link it directly to Youtube if you dont want your site link on here
https://www.youtube.com/watch?feature=p ... e9aMLZX9i0
https://www.youtube.com/watch?feature=p ... e9aMLZX9i0
- by Harry72
- Sun Dec 14, 2014 3:48 am
- Forum: Suggestions, Feedback and Support
- Topic: Unique little layout square I started making
- Replies: 11
- Views: 2822
Re: Unique little layout square I started making
Could you give us a link so we dont have to go searching for it
- by Harry72
- Sun Nov 30, 2014 9:10 pm
- Forum: Member Introductions
- Topic: Newby from down under
- Replies: 5
- Views: 416
Re: Newby from down under
Mike I'd be Port Pirie SA, thanks for the welcome guys!
- by Harry72
- Sun Nov 30, 2014 7:16 am
- Forum: Member Introductions
- Topic: Newby from down under
- Replies: 5
- Views: 416
Newby from down under
Gday guys, been watching the excellent videos for ages and only just noticed a forum button
So here I am...
Im just a beginner on the tig, Im mainly into car stuff and a bit of backyard fab... wood or metal, I like to make things you could say
So here I am...
Im just a beginner on the tig, Im mainly into car stuff and a bit of backyard fab... wood or metal, I like to make things you could say
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities