I agree with this guy ^^^^^^
Lower amperage & hold them sides a little longer to get rid of that undercut. I usually hold the sides a bout a full 1 second & just pass through the center on my way to the opposite side.

Totally depends on the situation & size / appearance of bead you are looking for. Usually for the lay wire technique, I find myself weaving the torch side to side or even walking the cup. For dipping, I generally hold steady on smaller beads, or pull back / up while trying to keep a tight arc if...

I used to build enormous SS tanks for the pharmaceutical & dairy industries. We used to use the amptrols that Velcro'd right to the torch because we were constantly moving around & inside the tanks. If you don't like using the foot pedal while standing, or you have large parts that are easie...

Just re-read gambles post & it got me thinking. If I wanted to (for example) buy & install the pulse upgrade, so I can weld at 150 pps (I believe that's what it's rated for), do I install the card & the machine stores the settings, or do I need to keep that card in the machine to use it,...

It's too late for that.....I already ordered the 210. For me, it makes sense as long as it welds nice. I already have a Sync 250 in the shop, but 90% of my work is in the field. The fact that this welder will be in my job trailer full time is another deciding factor for me. I have some serious OCD w...

There's not much info out there yet on this fairly new machine & I think it deserves a real review from a "real" welder. There are a couple reviews on YouTube, but it's pretty apparent the guy doing the review is a hobbyist & does not weld for a living. Is it an inverter machine in...

I have a 250 in the shop as well, but this 210 is a completely different setup. Inverter based technology, whatever that means? I've had guys tell me that it is a true inverter, within the heavy 252 case & I've also had guys say that there's no way it could be an inverter due to how heavy it is?...

Just ordered a 210 & was wondering if anyone had anything good or bad to say about it? I did as much research on it as I could, but being fairly new, there's not much out there yet. I do have a larger tig for the shop, but this machine will be setup in my job trailer as I do mostly commercial co...