I built this one a few years back for a friend of mine. Not perfect but it worked well. I used 2x6 1/4" wall if I remember correctly.

Are you running that for A/C or for on board air? Cummins right?

I've heard the copper winding machine can work longer in comparison to the aluminum machines with out over heating I'm assuming. Any truth to that?

My steel Supplier has an Ellis and is in love with it, I own a cheaper horizontal bandsaw and a Baleigh coldsaw. The cold saw works well but is a pain to keep clean and requires a wide range of different blades ($150 and up) for cutting different wall thicknesses and material type. Bandsaws seem to ...

Copper sa200 21.JPG Not copper Nice-1972-lincoln-sa-200-pipeline-arc-welder-sa-200-img-1.jpg like previously said the stator with the squared of edges aren't copper I rebuilt a red face a few years back and sold it........ wish I hadn't but I had no use for it. Sure did weld smooth. sa200 28.JPG

3/4 stainless rod with silcon bronze on the points

I don't have any first hand experience with this but when I was considering buying a New Tig machine and investigating inverters my LWS said this was the number one reason the inverters burn up. I believe he said something about inconsistent supply voltage. I'm not saying they said it can't or shoul...

I honestly don't no what happened with the hoe, I turned around while I was moving it and found that. I was removing stumps at my house at the time and its pretty rocky here so that must have done it. Thanks

]somehow I managed to snap the arm of my backhoe 10343541_895780773771304_7915374928287210922_n[1].jpg 10404487_895780640437984_931862258930939964_n[1].jpg Some backracks I made for an f350 DSC_0658.JPG made this small bin to hold my poker and shovel for my wood stove but I think it would serve bett...

Hello everyone, I've been following Jody on Youtube for years. I thought it was about time I joined the forum, seems to be a lot of good info here.