[attachment=0]image.jpg

I drew it out on a peice of paper best I can not sure how to post it on a I pad, I can take a pic and email it to some one. It's may be something I missing but I've never had this 2-3 call out before.

I agree completly my boss is completely lost and that dosent surprise me at all, I'm assuming it's going to be welded all around. But 7 k peice of material and a brand new print with same part and dimensions on it for the exception of the 2-3 just had me confused

I'll try to describe the symbol, it's is a standard left to right down arrow with split v on the far left describing the filler as 556 the at the top center it has a convex symbol, below that it has a bevel symbol and to the right it has 2-3. Right above it were the arrow breaks down to the weld are...

Yes the numbers 2-3 are to the left side of the bevel symbol, underneath the all around symbol. I figured this was length and pitch but not toured why it would be welded all around and have a length and pitch. In the past I've done this job and it's always been weld all around while keeping heat inp...

New guy here, and I have ran across a symbol that has me curious. The material is HR 120 to A36 basically is a mild steel ring approximately 16 inches in id by 4 1/2 with a 3/16 thick HR 120 ring the has to be welded to the OD with 556 1/16 filler. I have no issues with that but the symbol on one en...