I'd bet heavily that you'd never be able to tell the difference by looking at the cuts, or even by feel. Setup and blade selection are going to determine the end performance of any of them. The Griz G1023RL and G0690 are excellent values in the range of $1400 shipped, and both have a large happy fol...

My understanding is standoff generally gives better quality cut and a little more thickness capbility as well, if the standoff distance is held consistent (usually with a stand-off guide). If there is no stand-off guide or the operator can't hold and maintain that consistent stand-off, then a drag t...

"Puddle doesn't want to advance" sounds like low amps for the thickness being welded.

What are your settings?

Do you got experience in residential luggage lifts? then i gotta ask you something about it...

I have the High Freq Tig module on my ranger 9. It works like a champ. I have run 100% duty cycle on it at 250amps. But I also bought a Lincoln water cooler for the my tig torch for doing aluminum. Here is what I can tell you about it. The control cable that comes from the ranger 9 to the tig module...

Good luck amigo..

Hi there, I am new here and hobbyist to welding hope I can learn new things about welding here.