[Mcloer]

When setting up to tig in a tight/small space recently I was having difficulty seeing where to position my torch and filler rod with the helmet down. I searched and found a small very high lumen led light. Placed a velcro strip under and around it to secure it to my helmet and voila, problem solved! Another $20 well spent.

88673E20-41A6-4EF6-8AAC-9F83EA4BF9B5.jpeg (50.6 KiB) Viewed 515 times

B79BBD09-1BF1-415A-ABAF-CC8410DCB5DE.jpeg (50.69 KiB) Viewed 515 times

461AC99C-8B56-49AF-96C5-29B2DDF2BDC5.jpeg (29.99 KiB) Viewed 515 times

[homeboy]

Good idea. Never tried the headlite trick. Because I just use mild steel I use a little swiveling led with a magnetic base that I can usually make work.