I must say it is very lively, excited and very civil as others have commented.
Introducing a new product into an industry such as Welding and Cutting, with a low rate of new technology coming through has been very interesting indeed.
I would hope that good professional people such as the ones on this site continue to bring forth their observations and critiques, as this is the only way a technology can improve and evolve to give the users what is needed. The very comments allow for more drive to achieve results. Every comment is considered and worked upon personally by our teams.
As to Mr. Lee's final observation, and subsequent comments from users Werkspace and Billbong, I would like to say in the spirit of "managing expectations"; that the Multiplaz 3500 watt system has small horsepower, so the pounds per inch pressure achieved can not be compared to a large dedicated plasma cutting system's larger horsepower with expection of same results. A user will need to apply some technique to get the system to blow out the metal for a cleaner plasma cut. Here at Multiplaz N.A., we have found that you get a 90% better cut on stainless steel ultilizing the same 70% diluted alcohol mixture that you weld stainless steel with.
Thank you from Multiplaz N.A., and on behalf of Multiplaz Moscow R&D and Multiplaz Shenzen Manufacturing and Distribution offices.
Patricia Lewis-Hansen, CEO Multiplaz N.A.
