Has anyone heard of these hoods? http://www.newequipment.com/Main/Produc ... 34349.aspx
I'm considering dropping the change to pick one up but I don't want another experience like the one I had with Jackson's Trusight auto lens. (I'm assuming these and those aluminum stick rods are standard issue in the portion of hell reserved for welders)
On a side note if anyone else is shopping around my personal favorites thus far:
-Optrel Satellite: Blue tinted lens which I find great for TIG work especially on aluminum and stainless. All shade controls are located on the outside including grind mode which is pretty damn handy when you consider all the times you have to remove your hood to adjust the shade.
-Jackson Nexgen EQC: All around good product that is EXTREMELY durable. I have one of these now and don't have any complaints.
-Miller Elite: Another great hood. Excellent visual clarity of the puddle and work piece.
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- MotherFluxxer
-
Active Member
-
Posts:
-
Joined:Thu Dec 29, 2011 2:24 pm
Something that reflects light back to the workpiece like a gold passive lens but is auto darkening.Alexa wrote:M.Fluxxer.
If you could order a personalized hood ... what capabilities would you add on to make it a 'perfect' hood?
Alexa
The ability to change the filter color with the push of a button.
Wouldn't that be great!MotherFluxxer wrote:...The ability to change the filter color with the push of a button.Alexa wrote:M.Fluxxer.
If you could order a personalized hood ...
Go break something, then you can weld it back the right way.
I have a tigerhood with the standard viewing size lense and an optel #10 ADF in it. I got that size cause most employers replace the standard plastics... I use it with a speedy loop for attatching to my fiber metal helmet and it works great, super light. Simplicity... Working out in Rocanville potash mine right now...
- MotherFluxxer
-
Active Member
-
Posts:
-
Joined:Thu Dec 29, 2011 2:24 pm
Just wanted to give a review on this hood....got a hold of a demo from the Fibre Metal rep.
The visual clarity is bar none. I mean that. I have never seen the weld puddle and base metal so clearly. The lens looks like one of those old school "cool blue" filters.
It is however a bit heavier than my jackson. I could live with it to see better though.
The visual clarity is bar none. I mean that. I have never seen the weld puddle and base metal so clearly. The lens looks like one of those old school "cool blue" filters.
It is however a bit heavier than my jackson. I could live with it to see better though.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Hey, MF,
You compared it to 3M's "cool blue". I assume that means it damps the orange flare in aluminum, and the somewhat yellow/orange in stainless?
That would interest me. I would also accept a little extra weight over my flip- Jackson.
Have you seen pricing?
Steve S
You compared it to 3M's "cool blue". I assume that means it damps the orange flare in aluminum, and the somewhat yellow/orange in stainless?
That would interest me. I would also accept a little extra weight over my flip- Jackson.
Have you seen pricing?
Steve S
- MotherFluxxer
-
Active Member
-
Posts:
-
Joined:Thu Dec 29, 2011 2:24 pm
definitely better than 3m's cool blue....same effect but a lot more vivid. It almost seems to dim the arc without sacrificing the light around the base metal. 280 I think is what holtsen gas quoted me. Dont quote me on that as I might be way off. The closest thing I've used to it is Sperian's Optrel Satelite hood.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Fibre-Metal does sell a "replacement lens", but their website does not have a "find a dealer" tab
I guess I'll have to dig locally... I think my nearest welding supplier deals in FM hardhats, at least...
Steve S
I guess I'll have to dig locally... I think my nearest welding supplier deals in FM hardhats, at least...
Steve S
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities