The guys at the Western Manufacturing Technology Show
were demonstrating their portable pipe and plate beveling tool.
http://www.youtube.com/watch?v=OwcrIKpWv78
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
Very nice! Every time I see a product like that, I always think "Now why didn't I think of that??"
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
That's a GREAT idea!
Steve S
Steve S
just bought a everlast 140, primarily to use practicing tig. I would like affordable recommendations for a flow meter that will provide argon for the tig torch as well as a second output to use for purge or gas flow for the back of the weld. I am unemployed and have limited resources, hope I can find one for $100 or less.
SUNNIVA
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Sunniva, I built my own.
Flowmeters can be had on e-bay for $10 ea. or less.
My setup here, with discussion:
(Ignore the first pic... NOT mine!)
http://forum.weldingtipsandtricks.com/v ... f=5&t=2092
Flowmeters can be had on e-bay for $10 ea. or less.
My setup here, with discussion:
(Ignore the first pic... NOT mine!)
http://forum.weldingtipsandtricks.com/v ... f=5&t=2092