General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

I received a BestBuy $50 gift card for Christmas and went shopping online.
I searched and searched but couldn't find anything, then I checked out the tools section.

I found the Strong Hand V-Pad starter kits for $21CAD. (two large and two regular)
There were three kits left online, so I bought them all. (a total of six large and six regular)

Last summer at the salvage yard, I found a cast iron table saw top for $5.
So, this will be the start of my portable welding table.
Attachments
Strong Hand V-Pads.JPG
Strong Hand V-Pads.JPG (95.5 KiB) Viewed 1249 times
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Hey,

I found some of those at my local industrial supplier, but i keep forgetting to go and buy them :-(

Mick
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Sure is hard to find/get Strong Hand Tools up here :(
I have found lots of sites with great prices, but, there shipping prices are outrages :o
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

A reminder for anyone else looking at this that does not know... These are for tacking stuff up ONLY.

If those rare-earth magnets get hot, they become rare-earth. (only.) ;)

Steve S
chriso
  • Posts:
  • Joined:
    Mon Nov 11, 2013 3:08 pm
  • Location:
    England

AKweldshop wrote:Sure is hard to find/get Strong Hand Tools up here :(
I have found lots of sites with great prices, but, there shipping prices are outrages :o
Can you use Amazon - they stock Stronghand with free shipping.

http://www.amazon.com/STRONG-ADJUSTABLE ... stronghand
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

chriso wrote:
AKweldshop wrote:Sure is hard to find/get Strong Hand Tools up here :(
I have found lots of sites with great prices, but, there shipping prices are outrages :o
Can you use Amazon - they stock Stronghand with free shipping.

http://www.amazon.com/STRONG-ADJUSTABLE ... stronghand
I've seen these magtabs for less than $10
I've seen tons of good prices on other sites about 1/2 of amazons price
Thanks anyway
John
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

http://www.stronghandtools.com/strongha ... ountryid=3
AKweldshop wrote:Sure is hard to find/get Strong Hand Tools up here :(
I have found lots of sites with great prices, but, there shipping prices are outrages :o
450dualsport
  • Posts:
  • Joined:
    Wed Oct 30, 2013 10:46 am

WerkSpace wrote: There were three kits left online, so I bought them all. (a total of six large and six regular)
I thought you had scored the last ones in Canada :x , but more can be found here:

http://www.kmstools.com/strong-hand-too ... -kit-11909

:lol: :lol: :lol:
User avatar
  • Posts:
  • Joined:
    Tue Jun 26, 2012 8:05 pm

Good score, (mine came with free shipping).
450dualsport wrote:
WerkSpace wrote: There were three kits left online, so I bought them all. (a total of six large and six regular)
I thought you had scored the last ones in Canada :x , but more can be found here:
http://www.kmstools.com/strong-hand-too ... -kit-11909
:lol: :lol: :lol:
User avatar
  • Posts:
  • Joined:
    Fri Nov 29, 2013 5:42 pm
  • Location:
    Vaudreuil-Dorion Qc.

450dualsport wrote:
WerkSpace wrote: There were three kits left online, so I bought them all. (a total of six large and six regular)
I thought you had scored the last ones in Canada :x , but more can be found here:

http://www.kmstools.com/strong-hand-too ... -kit-11909

:lol: :lol: :lol:
Thanks for the link buddy
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

thanks WerkSpace, I'll check them out
WerkSpace wrote:http://www.stronghandtools.com/strongha ... ountryid=3
AKweldshop wrote:Sure is hard to find/get Strong Hand Tools up here :(
I have found lots of sites with great prices, but, there shipping prices are outrages :o
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Post Reply