Sarge
- Sarge
-
Workhorse
-
Posts:
-
Joined:Mon Dec 06, 2010 2:10 pm
-
Location:Colorado
-
Contact:
Hey guys... anyone with this dual pulse welder and experience in aluminum with it that can share techniques of better welding would be very welcome to hear from. May be looking for someone to jump on the other like machine to help sometime soon as well. SE Colorado.
Be Innovative.
Goal is perfection, but excellence is Acceptable.
Powermig 255C
Powermig 350MP x2
175 squarewave
Weld-pac 100
Hypertherm 600
Hypertherm 1250
Goal is perfection, but excellence is Acceptable.
Powermig 255C
Powermig 350MP x2
175 squarewave
Weld-pac 100
Hypertherm 600
Hypertherm 1250
Sarge
- Sarge
-
Workhorse
-
Posts:
-
Joined:Mon Dec 06, 2010 2:10 pm
-
Location:Colorado
-
Contact:
Wow! I was hoping for more input.... 
Well, then I will give more info. We weld .188 3003 treadbrite, 5052, 6061, .058 3003 treadbrite with 4043 wire and 100% argon.
Well, then I will give more info. We weld .188 3003 treadbrite, 5052, 6061, .058 3003 treadbrite with 4043 wire and 100% argon.Be Innovative.
Goal is perfection, but excellence is Acceptable.
Powermig 255C
Powermig 350MP x2
175 squarewave
Weld-pac 100
Hypertherm 600
Hypertherm 1250
Goal is perfection, but excellence is Acceptable.
Powermig 255C
Powermig 350MP x2
175 squarewave
Weld-pac 100
Hypertherm 600
Hypertherm 1250
be patient, dude 
not everyone checks this board every day. if anyone has used that lincoln power mig 350mp for alu, you'll hear about it. I don't know if anyone on here has that specific machine, though, but there are some folks who do alu MIG.
not everyone checks this board every day. if anyone has used that lincoln power mig 350mp for alu, you'll hear about it. I don't know if anyone on here has that specific machine, though, but there are some folks who do alu MIG.