![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I laid out the welding leads, hooked the gauges to the tanks, marked the pipe and cut the upset off the first end. I'd no sooner let off the cutting lever on that first cut, than I hear an ominous hissing sound emanating from my O2 regulator. Yep, diaphragm went paws up.
I mumbled a few bad words, broke down the torch setup, wound the welding leads back up...and we'll try again next weekend. Assuming the LWS can get my regulator fixed by then. Otherwise, I just might buy a new set of gauges so I've got spares.
Have you ever noticed that this kind of thing always happens when the job you're on is at a buddy's house...working for beer?
LDB