Decastar 180E (160A, 1ph, 230V)
Here is a link to the welder
http://www.decaweld.com/en/home/decasta ... 37.uw.aspx
Is this a decent welder for doing body panels and bikes, probably no more then 1/2" steel.
I also found a 135E Deca and also a Vaper Mig 175-T
all in my price range $200 (Vaper), $300 (180E) and $350 (135E).
I just want wire feed and perhaps maybe later on able to do gas.
Decastar is an old Princess Auto/Harbor Freight brand.
Brand new welder from HomeDepot.ca
$449.00 / Each - Century 80gl Flux - Cored Wire Feed Welder - Lincoln Electric
$489.00 / Each - Handy MIG Wire Feed Welder - Lincoln Electric
..............and up the cost goes..............
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Haven't seen this particular Italian power source so can't attest to quality. If it's like other cheap Italian migs coming into Australia, it's an entry level power source meant for home/handyman light duty. If you are doing auto body work for a living this power source is not for you. If you are doing hobby restoration work in your home garage it should be fine.
You won't be welding 1/2" steel with it. You need 250A + for that. 1/2" plate mig is not hobby work, if that's what you want to do you should look for a second hand branded work horse to keep in your price range.
Generally with mig you should get the biggest power source you can afford unless you know you are only ever going to weld thin sheet. Migs run out of oomf quick when you start increasing plate thickness and you don't want to be running your machine at maximum amps all the time, you should aim for 50-75% duty so as not to flog it.
You won't be welding 1/2" steel with it. You need 250A + for that. 1/2" plate mig is not hobby work, if that's what you want to do you should look for a second hand branded work horse to keep in your price range.
Generally with mig you should get the biggest power source you can afford unless you know you are only ever going to weld thin sheet. Migs run out of oomf quick when you start increasing plate thickness and you don't want to be running your machine at maximum amps all the time, you should aim for 50-75% duty so as not to flog it.
Flat out like a lizard drinkin'
If I buy brand name, use it for a bit - how ever long I need it, then sell it used and get most of my money back.
Do all brand name welders hold their value good. Lincoln, Miller, Hobart etc.
How much would I expect back? 50% 65% 75%?
Are inverter units better to buy for resale value and quickness of sale.
Do all brand name welders hold their value good. Lincoln, Miller, Hobart etc.
How much would I expect back? 50% 65% 75%?
Are inverter units better to buy for resale value and quickness of sale.
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities