General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
klutchdust
- klutchdust
-
New Member
-
Posts:
-
Joined:Thu May 31, 2012 10:51 am
anthonyfawley
- anthonyfawley
-
Workhorse
-
Posts:
-
Joined:Fri Apr 23, 2010 6:58 pm
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
And the four seasons are: crawfish, shrimp, crab, mosquito.FluxCore wrote:Central Lousyana. Home of the 4 'P's'......Pine trees, Politics and Poor Poeple
I'm in south LA, where we don't expect corruption in our politicians, we DEMAND it!
Steve
<<<<<<<Barrow County Georgia....about an hour or so north east of Atlanta
Life is not a journey to the grave with the intention of arriving safely in
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming
- WOW- What a Ride
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming
- WOW- What a Ride
Lucky Bastard
- Lucky Bastard
-
New Member
-
Posts:
-
Joined:Tue Jun 26, 2012 7:18 am
Greg From K/W
- Greg From K/W
-
Ace
-
Posts:
-
Joined:Sun Nov 27, 2011 8:55 pm
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
I think it already is.....at least in the General Shop Talk category.
BTW, I finally tried that mexican restaurant you recomended. It was pretty good. Very reasonable for lunch, too!
BTW, I finally tried that mexican restaurant you recomended. It was pretty good. Very reasonable for lunch, too!
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
spiritwalker
- spiritwalker
-
New Member
-
Posts:
-
Joined:Tue Jul 17, 2012 12:12 pm
-
Location:Mitchell, South Dakota
Currently residing in Mitchell, South Dakota. Originally from the Oregon Coast, NE Oregon, and Lafayette, Indiana. Nice thing about being a welder, you can get a job almost anywhere.
I have no idea at all where I'm originally from I was a Navy Brat, but the last place before I got to Virginia Beach Virginia was the middle of the woods in NW Arkansas, closest town was Clinton.
Now after retiring form the Navy myself I'm stuck in Va Beach for the rest of my life
Now after retiring form the Navy myself I'm stuck in Va Beach for the rest of my life
seriousiii
- seriousiii
-
New Member
-
Posts:
-
Joined:Wed Aug 10, 2011 6:47 am
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Ultralow787
- Ultralow787
-
Guide
-
Posts:
-
Joined:Fri Apr 29, 2011 11:30 pm
-
Location:Ontario, Canada
I'm sure lots of folks could use some of that rain! We finally got a bit tonight, but it's been a good month since we had any to speak of. Everything looks like burnt toast!
Perfection is impossible, but if you strive for perfection, excellence is obtainable!
1983 Canox "Sparkler" 225 AC Stick Welder
Hobart 210 MVP MIG Welder
Harris "Spitfire" Oxy-Acetylene Set
1983 Canox "Sparkler" 225 AC Stick Welder
Hobart 210 MVP MIG Welder
Harris "Spitfire" Oxy-Acetylene Set
klutchdust
- klutchdust
-
New Member
-
Posts:
-
Joined:Thu May 31, 2012 10:51 am
spiritwalker
- spiritwalker
-
New Member
-
Posts:
-
Joined:Tue Jul 17, 2012 12:12 pm
-
Location:Mitchell, South Dakota
Originally, I am from N.E. Oregon. Spent nine months in Central Indiana and now I am living in Eastern South Dakota. I enjoy what I do because it has taken me out of an ordinary life.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
Steve/Otto
I'm supposed to pick up some equipment from The Stennis Space Center right by the coast in Missisippi a week from today. Do you think it would be a good idea to delay that trip til later?
Thanks!,
Other Steve
I'm supposed to pick up some equipment from The Stennis Space Center right by the coast in Missisippi a week from today. Do you think it would be a good idea to delay that trip til later?
Thanks!,
Other Steve
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities