- 20160531_121221.jpg (74 KiB) Viewed 1443 times
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Here's a weird story. My friend gave me this wagon wheel and another just like it. One day last summer, me and the wife are out on the back deck enjoying some cocktails. The friend who gave me these wheels came to my house, walked around to the deck where we were and said that one of the wheels was on fire in the front yard. We jumped up and went out to look and sure enough, this wheel was smoldering. I picked it up and brought it over by the garage and sprayed it down with the hose. After 10 minutes of WTF's and head shaking, we go back to drinking. About a half hour later, I smell something like burning rope so I go out front to see what's up and this wheel was smoldering again. I have security cameras so we check to see if we had some pranksters and the only thing you see on the tape is the wheel start smoking all by itself. I meant to share this awhile ago but I forgot and just found the pic again. Could something in the hub grease have broken down to a volatile component and spontaneously combusted? Absolutely true story. The other wheel was fine but I threw them both in the trash.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
It just weird that the 2 wheels came off the same wagon but only one started on fire. You would think that after decades of being in the elements, nothing would have remained to combust. Just plain weird.Poland308 wrote:I believe they used rendered pig fat for grease on old wagon wheels. So that hub was probably saturated through with the light oils that remained.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
You know...we actually thought that the weather was a contributor but it was mild that day and the wheels were in the shade in the wifes flower garden. I gets damned hot here but not hot enough to light wood on firemcostello wrote:Just how hot does it get in Chicago anyway?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
I have more questions than answers
Josh
Josh
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Well that changes everything I know. That is a good bit of info to know
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Huh......... That doesen't really make a whole lot of sense to me.................................
Water is a perfect conductor, that's pretty well known, so a reaction takes place inside the wood where bacteria starts to eat the wood and reproduce and all that eating and humping creates enough friction to light it on fire, but only if it was wet?
So what, the water transfers the heat from the bacteria around, wouldn't the water evaporate prior to the ignition? How did that bacteria get there in the first place, from the water?
I might just be having a dense day today but that doesn't sound right.
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
It all makes more sense now than before. Those wheels sat in a shady spot in my front yard and absorbed water and never really dried out. The wheel that burned was alot more rotted than the other. I guess what we can take away from this is that bacteria need to use more KY so they quit lighting fires when they are doin the nastyOlivero wrote:Huh......... That doesen't really make a whole lot of sense to me.................................
Water is a perfect conductor, that's pretty well known, so a reaction takes place inside the wood where bacteria starts to eat the wood and reproduce and all that eating and humping creates enough friction to light it on fire, but only if it was wet?
So what, the water transfers the heat from the bacteria around, wouldn't the water evaporate prior to the ignition? How did that bacteria get there in the first place, from the water?
I might just be having a dense day today but that doesn't sound right.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
I have always known this happens but not the cause. I followed a fire truck to a barn fire call once where you could smell smoke but no visible fire. The whole neighbourhood showed up with forks and we tore off some boards and started pitching hay out. The firemen kept hoses trained on the mow and pockets of hot ashes would be exposed and explode into flame instantly once the air hit. We saved the barn and it was quite an education. When I was a kid and worked at a neighbours dairy farm I have come across small pockets of dead ashes inside the mow and never really thought too much about it. Lucky.
Compost heaps if taken care of properly achieve temperatures hot enough to kill bacteria and cook weed seeds to make them unable to germinate. Some of the local farms use compost setups to get rid of animal carcasses. A 300# pig can be totally gone,teeth and bones as well in just a few weeks. But these setups sometimes catch fire or smolder if not aerated regularly.
The coal pile at the power plant catches fire regularly during rainy spells. That's why they are out on the pile with the dozers moving it back and forth all the time.
The coal pile at the power plant catches fire regularly during rainy spells. That's why they are out on the pile with the dozers moving it back and forth all the time.
I have more questions than answers
Josh
Josh
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
That's why ADM built that huge coal dome at their co-gen plant in Clinton, IA., and I think they still rake the pile. If you've ever seen it, you understand why the locals call it the "titty dome" BTW, that was our designated storm shelter during the build, as it's designed to survive an EF-5 tornado. It was also the rally point for evacuations.Poland308 wrote:
The coal pile at the power plant catches fire regularly during rainy spells. That's why they are out on the pile with the dozers moving it back and forth all the time.
Steve S
The theory now is the Titanic sank because a long lasting coal bunker fire that they couldn't extinquish weakened the outer hull plates which split when hitting the iceberg. Maybe spontaneous combustion was the culprit
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Or maybe they sank the ship to put out the fire?homeboy wrote:The theory now is the Titanic sank because a long lasting coal bunker fire that they couldn't extinquish weakened the outer hull plates which split when hitting the iceberg. Maybe spontaneous combustion was the culprit
Regardless. The ship could have easily avoided collision or even if not avoided the collision they could have reduced the impact by hitting head on and at the full speed with the course they were on. My father used to be a first mate on freighter vessels in Lake Michigan so he must know something about ships.
Last edited by Farmwelding on Mon Apr 24, 2017 6:30 am, edited 1 time in total.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
The theory I heard is the crappy steel they used to plate the hull was brittle and became even more so by being in cold water but I can agree with the coal fire theory too.homeboy wrote:The theory now is the Titanic sank because a long lasting coal bunker fire that they couldn't extinquish weakened the outer hull plates which split when hitting the iceberg. Maybe spontaneous combustion was the culprit
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
So British ship, Irish workers, Chinese steel-steel is thin and cheap, fire in the belly of the ship, hit an iceberg and boom sunken ship.electrode wrote:Chinese steel.
only one question...why Chinese steel. China was not a large steel manufacturer from 1910-1912 during the building of the ship and it would have been British steel, seeing that Britain was the largest manufacturer at the time of steel. So what can we learn? British steel is bad...maybe?
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- ldbtx
-
Heavy Hitter
-
Posts:
-
Joined:Thu Jun 13, 2013 12:54 am
-
Location:North Central Texas
-
Contact:
Metallurgy was not advanced enough to anticipate the problem of the steel weakening in the extremely cold water.Farmwelding wrote:So British ship, Irish workers, Chinese steel-steel is thin and cheap, fire in the belly of the ship, hit an iceberg and boom sunken ship.electrode wrote:Chinese steel.
only one question...why Chinese steel. China was not a large steel manufacturer from 1910-1912 during the building of the ship and it would have been British steel, seeing that Britain was the largest manufacturer at the time of steel. So what can we learn? British steel is bad...maybe?
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
I couldn't imagine wooden ships and what they did in cold water. Those joints have to be strong as hell to resist the shrinkage in the cold and then expanding in the sun. These people are far better craftsman than I probably ever will be. Hand cut joints and figuring all the complex joinery without metal devices with just a pad and pen.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
My mom used to live near a place where they shredded up the offcuts from sawmills, and even entire logs, to make hardwood mulch for gardens. They used machines to push this shredded wood up into tall (20' high) piles, and they had automatic sprinklers to wet it down. Every time I drove past that place you could see the heat and steam coming up off the piles. You could also smell it.
I suspect that, just like with compost heaps, there were bacteria that were "digesting" the mulch, and the heat of their metabolism is what made the piles of mulch give off so much heat and steam. And I think the automatic sprinklers were important not just to give the bacteria the water they needed to live, but also to prevent the piles from catching on fire.
I suspect that, just like with compost heaps, there were bacteria that were "digesting" the mulch, and the heat of their metabolism is what made the piles of mulch give off so much heat and steam. And I think the automatic sprinklers were important not just to give the bacteria the water they needed to live, but also to prevent the piles from catching on fire.
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities