General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Shop Talk huh? WHere is everyone from?
Post Reply
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Next week, everything should be fine.

This is quite a storm, but it's not a disaster. I'll know more about flooding in that area later today, but it shouldn't be major.

Steve S.
Top
mbcoupe
  • Posts:
  • Joined:
    Sun Aug 12, 2012 9:54 am

just moved to Little Rock Arkansas after living in San Diego for 36 yrs
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

delraydella wrote:Steve/Otto

I'm supposed to pick up some equipment from The Stennis Space Center right by the coast in Missisippi a week from today. Do you think it would be a good idea to delay that trip til later?


Thanks!,
Other Steve
There's limited wind damage around Stennis, and they're fairly well protected from flooding. It should all be passable before the weekend is out.

I fared well here, too. Almost no damage, about 6" water in the yard, and the rain finally stopped.

Oh, yeah, the Goodbee Quickstop was open this morning, so I'm no longer out of beer. ;)

Steve S.
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Hey,

Priorities , This man has them right. lol.

Mick
Top
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

It's important to have priorities! Beer can make any situation more bearable.

My trip got pushed back a week anyway,as we are starting to get busier. Auto Show season is starting earlier this year :)
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

I gotta know...

What are you picking up from Stennis?

With what you do, it's got to be interesting.

Steve S.
Top
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

A paint colorant dispenser, one of those things you see in every store that mixes custom paint colors. We have to match a lot of different corporate logo colors, etc., so with this thing, all we need to do is get the correct mix ratios for whatever we need and we can duplicate it whenever we need to.

It was a pretty good deal too. I think they usually run in the several thousands of dollars for one. I got this one for $25 from government surplus.

O.S.
Attachments
41QSCI12933005.jpg
41QSCI12933005.jpg (23.28 KiB) Viewed 2131 times
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Not nearly as interesting as I'd hoped, but, yes, a very good deal for that.

Steve S.
Top
delraydella
  • Posts:
  • Joined:
    Mon Apr 25, 2011 7:35 pm
  • Location:
    Detroit, MI

I guess that is pretty boring..........maybe I should have said I'm picking up a "Graduated Multi Chromatic Liquid Medium Dispensing Unit"
That does sound better. Much more NASAish! :geek:
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
Top
jadatown
  • Posts:
  • Joined:
    Mon Jan 30, 2012 3:03 pm

Im in Arkansas.
Top
SPOKESY
  • Posts:
  • Joined:
    Sun Feb 17, 2013 7:28 am

I'm from Dundee in Scotland. It's about 60 miles North East from the capital, Edinburgh and the same south west from the oil capital of the UK, Aberdeen.
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Welcome Mate,

The more the merrier. From all round the world will help everyone get a bigger picture of welding.

Mick
Top
User avatar
  • Posts:
  • Joined:
    Sun Feb 17, 2013 1:30 pm
  • Location:
    Colorado

New, (old dog), kid in the block here from Colorado about 100 miles South of Denver.
Go break something, then you can weld it back the right way.

Image
Top
SPOKESY
  • Posts:
  • Joined:
    Sun Feb 17, 2013 7:28 am

Thanks Mick.

Can't contribute much at the moment but hopefully I can in the near future :D .
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

All good mate. Sometimes the littlest things are of the most value. Things you learned in your course may save someone else hours of trouble.

Mick
Top
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Tampa, FL. I will be from two places soon. Southern NJ., and likely Tampa when it gets too cold up there. I may come back to do some boat projects in between. Does this make me a welding Gypsy?
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
Mrkil
  • Posts:
  • Joined:
    Wed Jan 30, 2013 10:04 pm
  • Location:
    Hamilton, Ontario, Canada

I'm in Hamilton Ontario. Taking structural welding at Mohawk College in Stoney Creek.
Top
Matthew
  • Posts:
  • Joined:
    Fri Feb 15, 2013 6:22 pm
  • Location:
    Austin, TX

Austin, TX were we have not had a winter or much rain in a few years!
Top
sajfos
  • Posts:
  • Joined:
    Wed Feb 27, 2013 4:00 am

Just joined this great site Yesterday !
Im from Preston , North West England .
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Hey,

Welcome to the forum.

Mick
Top
Colt45GTO
  • Posts:
  • Joined:
    Sat Feb 23, 2013 5:42 pm

ah i missed this thread.....

where am i from? originally the womb but grew up in Manchester UK moved to Congleton, Cheshire where i have resided ever since.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Colt45GTO wrote:where am i from? originally the womb but ...
I remember going to a picnic with Dad and coming home with Mom....

:lol: :lol: :lol: :lol: :lol: :lol:
Top
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Otto Nobedder wrote:
Colt45GTO wrote:where am i from? originally the womb but ...
I remember going to a picnic with Dad and coming home with Mom....

:lol: :lol: :lol: :lol: :lol: :lol:
LOL
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
Metals406
  • Posts:
  • Joined:
    Thu Feb 28, 2013 11:53 pm

NW Montana -- hatched and raised.
Top
Post Reply

Return to “Welding Forum General Shop Talk”