Hello, we look for a sketch of that Kempo TIG TELECOM : S 250P, or C 100P
Or a scan of the manuals, they may contain some electrical sketch
Not produced anymore ,
This is for that welder KEMPPI 250 AC DC
Any useful info welcome, may be a basic telecom sketch would do it (probably)
220 AC mono or 380 TRI
Thank you very much -- This is for a friend quest
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
My attempt to see these images told me (in my limited French) that I do not have permission to view these pages.
Try copying the pages to your computer and sharing them that way?
Steve
Try copying the pages to your computer and sharing them that way?
Steve
AH sorryOtto Nobedder wrote:My attempt to see these images told me (in my limited French) that I do not have permission to view these pages.
Try copying the pages to your computer and sharing them that way?
Steve
I made a public album ; https://goo.gl/photos/vQkngK1RDtebrrQE6 should be OK . Thanks
Do you think a sketch of the electrical circuitry of those telecoms could be find (TIG, MMA) ?
Is that brand KEMPPI KEMPOMAT distributed in USA/ CANADA ?
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Hello
How is called that sort of welder telecom, please ? what is the name for them ? I will look for docs with Google in English
Thanks
How is called that sort of welder telecom, please ? what is the name for them ? I will look for docs with Google in English
Thanks
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I hope I'm not misunderstanding.
You're looking for electrical/electronic schematics and drawings for this machine?
Or ways to interface to it to upgrade software?
Steve
You're looking for electrical/electronic schematics and drawings for this machine?
Or ways to interface to it to upgrade software?
Steve
Hello .
Electrical drawing of a remote control box , then the pins to interface with that kemppi 250 ac/dc should be useful of course.
I don't think there is software yet on that era remote control box anyway.
Regards
Electrical drawing of a remote control box , then the pins to interface with that kemppi 250 ac/dc should be useful of course.
I don't think there is software yet on that era remote control box anyway.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
It is OK
I find the sketch . What I did not have is a sketch of the elements in remote control box but having the ones for the welder it is identical.
I find some of the pinning too .
So, still interested in the wiring sketch of a similar remote control box . Thanks Kemppi brand, made in Finland, is not sold in USA.
So if someone have a sketch that should be from another brand.
Regards
I find the sketch . What I did not have is a sketch of the elements in remote control box but having the ones for the welder it is identical.
I find some of the pinning too .
So, still interested in the wiring sketch of a similar remote control box . Thanks Kemppi brand, made in Finland, is not sold in USA.
So if someone have a sketch that should be from another brand.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
SO, no one have such a sketch -electronics of a remote control box) ?
My friend need to plan and prototype without having the welder at hand, so any information is welcome
He is good with electronics, and that should be relatively simple , a similar mounting than the one on the welder as there is a switch to use when the external command box is used
Thanks in advance
My friend need to plan and prototype without having the welder at hand, so any information is welcome
He is good with electronics, and that should be relatively simple , a similar mounting than the one on the welder as there is a switch to use when the external command box is used
Thanks in advance
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Hello, that would help, buy it is mostly the wire diagram for a remote control box for a tig welder we have interest in.Poland308 wrote:Do you mean your looking for a wire diagram or a schematic for a foot control?
Control on the AC shape and GAZ post flow .
Just a sample so to see how are the controls wired
Those are just 3 pins . Mass , 10v positive, and 10k potentiometer output so this is fairly simple ( pedal for amps is more complicated)
Anyway any wiring sketch would be of interest to us.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities