[motox]

harmonic's happen whenever a circular saw blades teeth come in contact with material.
now add tube similar to a woodwind instrument and the sound is amplified like a pipe
organ. poor example but I'm no engineer.
craig

[Otto Nobedder]

We got the Morse, with the vee-blocks, and the stainless blade.

Sadly, no one read the directions.

The vee-blocks are for smaller pipe, and the saw should be fed aggressively.

The directions came out after the blade was badly dulled and missing a few teeth.

We'll try again when all is fresh.

Steve S

[soutthpaw]

We got the Morse, with the vee-blocks, and the stainless blade.

Sadly, no one read the directions.

The vee-blocks are for smaller pipe, and the saw should be fed aggressively.

The directions came out after the blade was badly dulled and missing a few teeth.

We'll try again when all is fresh.

Steve S

Here is a good video on using the saw from Morsehttps://youtu.be/l1DYRWDVquo

[Tom Osselton]

Santa came early I just bought my Xmas present a14" Evolution in Calgary for $600.00 the prices on Amazon are American.

http://www.amazon.com/Evolution-Power-T ... B003TX1UPO

[soutthpaw]

Santa came early I just bought my Xmas present a14" Evolution in Calgary for $600.00 the prices on Amazon are American.

http://www.amazon.com/Evolution-Power-T ... B003TX1UPO

Looks like you will need the slip on V blocks for that saw. Quick search didn't find them on Morse or Evolution website

[motox]

i think a picked up my v blocks for my morse on amazon
craig

[Tom Osselton]

It came with a slip on v block that fits on the ajustable jaw.