Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Can anyone lead me to any great resources, specifically books, that can help me learn more about metallurgy. I have recently been interested in the manufacturing of steel and what goes into it and I feel like it will help my understanding of welding better.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
That one is already on the gonna get it soon list thanks to Jody.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Metals and how to weld them. Great book.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
exnailpounder wrote:Metals and how to weld them. Great book.
+1
- ldbtx
-
Heavy Hitter
-
Posts:
-
Joined:Thu Jun 13, 2013 12:54 am
-
Location:North Central Texas
-
Contact:
+ another 1MosquitoMoto wrote:exnailpounder wrote:Metals and how to weld them. Great book.
+1
Miller Bobcat 225
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Tweco Fabricator 211i
AHP AlphaTIG 200x
Lincoln SP-135+
Hypertherm Powermax 30 Air
ProStar O/A torch
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Alright like I said I am already getting metals and how to weld them. Anything else at all
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Metals and How to Weld Them is a good book 
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
There's a really good one, the name is right on the tip of my tongue. I just can't think of it at the moment...
Actually, the text book I have from school is Welding Skills by B.J. Moniz and R.T. Miller. from American Technical Publishers.ISBN# 978-0-8269-2992-1. It addresses the metallurgy of welding a good bit. The catch is that it cost $120.00 new, but you could probably find one for much less.
And
It's still not as highly recommended as that other one.
Actually, the text book I have from school is Welding Skills by B.J. Moniz and R.T. Miller. from American Technical Publishers.ISBN# 978-0-8269-2992-1. It addresses the metallurgy of welding a good bit. The catch is that it cost $120.00 new, but you could probably find one for much less.
And
It's still not as highly recommended as that other one.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Did anyone mention Metal and How to Weld Them yet? And then there is Metal and How to Weld Them. Or Metals and How to Weld Them is good too. 
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
I heard that somewhereexnailpounder wrote:Did anyone mention Metal and How to Weld Them yet? And then there is Metal and How to Weld Them. Or Metals and How to Weld Them is good too.
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Jeff's got carbon paper on his keyboard
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
You know since all of you are so insistent on me getting the book you all should just send me a copy to make sure I get it. What was the name of it again. I seem to have forgotten.
What was the name of it again. I seem to have forgotten. A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder wrote:Did anyone mention Metal and How to Weld Them yet? And then there is Metal and How to Weld Them. Or Metals and How to Weld Them is good too.
Just because it's the obvious answer doesn't mean it's the wrong one..
I have more questions than answers
Josh
Josh
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
AndersK wrote:Jeff's got carbon paper on his keyboard
Just getting him used to what all the old timers are gonna do to him on every job he goes on until he starts shaving Ifyoucantellmewhatthissaysiwillbuyyouabeer.