Hello, we look for a sketch of that Kempo TIG TELECOM : S 250P, or C 100P
Or a scan of the manuals, they may contain some electrical sketch
Not produced anymore ,
This is for that welder KEMPPI 250 AC DC
Any useful info welcome, may be a basic telecom sketch would do it (probably)
220 AC mono or 380 TRI
Thank you very much -- This is for a friend quest
Last edited by olek on Wed Jun 28, 2017 2:13 pm, edited 1 time in total.
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Do you think a sketch of the electrical circuitry of those telecoms could be find (TIG, MMA) ?
Is that brand KEMPPI KEMPOMAT distributed in USA/ CANADA ?
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
How is called that sort of welder telecom, please ? what is the name for them ? I will look for docs with Google in English
Thanks
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Electrical drawing of a remote control box , then the pins to interface with that kemppi 250 ac/dc should be useful of course.
I don't think there is software yet on that era remote control box anyway.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
I find the sketch . What I did not have is a sketch of the elements in remote control box but having the ones for the welder it is identical.
I find some of the pinning too .
So, still interested in the wiring sketch of a similar remote control box . Thanks Kemppi brand, made in Finland, is not sold in USA.
So if someone have a sketch that should be from another brand.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
SO, no one have such a sketch -electronics of a remote control box) ?
My friend need to plan and prototype without having the welder at hand, so any information is welcome
He is good with electronics, and that should be relatively simple , a similar mounting than the one on the welder as there is a switch to use when the external command box is used
Thanks in advance
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Poland308 wrote:Do you mean your looking for a wire diagram or a schematic for a foot control?
Hello, that would help, buy it is mostly the wire diagram for a remote control box for a tig welder we have interest in.
Control on the AC shape and GAZ post flow .
Just a sample so to see how are the controls wired
Those are just 3 pins . Mass , 10v positive, and 10k potentiometer output so this is fairly simple ( pedal for amps is more complicated)
Anyway any wiring sketch would be of interest to us.
Regards
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch