Page 1 of 1
Copper work today
Posted: Thu Mar 22, 2018 7:25 am
by Coldman
Did a chilled water pump upgrade today. Increased discharge check valve from 4” to 5” for increased flow.
- IMG_4842.JPG (91.23 KiB) Viewed 522 times
Halfway through my oxy regulator failed causing my oxy hose to whip off and strike me.
- IMG_4848.JPG (53.29 KiB) Viewed 522 times
Oh well, some would say I needed a good whipping.
Sent using Tapatalk
Re: Copper work today
Posted: Thu Mar 22, 2018 7:34 am
by cj737
Who says welding isn’t a contact sport?
Re: Copper work today
Posted: Thu Mar 22, 2018 7:36 am
by motox
looks like it got pretty close to your head, ouch..
craig
Re: Copper work today
Posted: Thu Mar 22, 2018 7:51 am
by Coldman
My lips were a little swollen so they may have taken a swipe or near miss. It happened too fast to see what was going on. Had to work out what happened. Initially I thought the hose failed and took out the reg but after close inspection I realised it was the other way round.
Sent using Tapatalk
Re: Copper work today
Posted: Thu Mar 22, 2018 8:01 am
by tungstendipper
Are you sure your wife didn't do that?
